Samsung LE26A346 user manual Securing the TV to the Wall, To avoid the TV from falling

Page 49

➣ Since the necessary clamps, screws, and string are not supplied, please purchase these additionally.

2. Remove the screws from the center back of the TV, put the screws into the clamps, and then fasten the screws onto the TV again.

➣ Screws may not be supplied with the product. In this case, please purchase the screws of the following specifications.

Screw Specifications

- For a 17 ~ 29 Inch LCD TV: M4 X 15

- For a 32 ~ 40 Inch LCD TV: M6 X 15

3. Connect the clamps fixed onto the TV and the clamps fixed

onto the wall with a strong string and then tie the string tightly.

➣ Install the TV near to the wall so that it does not fall backwards.

➣ It is safe to connect the string so that the clamps fixed on the wall are equal to or lower than the clamps fixed on the TV.

Securing the TV to the Wall

Caution: Pulling, pushing, or climbing on the TV may cause the TV to fall. In particular, ensure your children do not hang over or destabilize the TV; doing so may cause the TV to tip over, causing serious injuries or death. Follow all safety precautions provided on the included Safety Flyer. For added stability, install the anti-fall device for safety purposes, as follows.

	To avoid the TV from falling:
	1. Put the screws into the clamps and firmly fasten them onto
	the wall. Confirm that the screws have been firmly installed
	onto the wall.
	➣ You may need additional material such as an anchor	Wall
	depending on the type of wall.	Wall
	depending on the type of wall.

➣ Untie the string before moving the TV.

4.Verify all connections are properly secured. Periodically check connections for any sign of fatigue for failure.

If you have any doubt about the security of your connections,contact a professional installer.

Wall

English - 47

Image 49

Contents LCD TV Contact Samsung Worldwide Precautions When Displaying a Still ImageContents Installing the Wall Mount Kit Installing the StandList of Parts Power Indicator Speakers PowerRemote Control Sensor Viewing the Control PanelPC in PC / Audio Viewing the Connection PanelConnect to the video and audio output jack on your PC Multi channel digital audio Connector for Service onlyCommon Interface Slot Connect to a Digital Audio ComponentEXT Teletext Functions Viewing the Remote ControlSwitching On and Off Installing Batteries in the Remote ControlPlacing Your Television in Standby Mode Mains lead is attached to the rear of your setWith the power on, press the Menu button Using the Tools ButtonViewing the Menus Signals are broadcasted. Please confirm with your local Settings are availablePlug & Play Storing Channels Automatically If you want to reset this featurePress the Enter button to select Country Channel mode Not available in DTV or external input modeStoring Channels Manually Colour System Auto/PAL/SECAM/NTSC4.43Adding channels Adding / Locking ChannelsLocking channels Assigning Channels Names Sorting the Stored ChannelsThen Move on the next letter Press the buttonLNA Low Noise Amplifier Fine Tuning Channel ReceptionChanging the Picture Standard Easy SettingResetting the Picture Settings to the Factory Defaults Adjusting the Custom PictureColour Tone Cool2/Cool1/Normal/Warm1/Warm2 Changing the Picture OptionsSize Auto Wide/169/Wide Zoom/Zoom/43/Just Scan Digital NR Off/Low/Medium/High/Auto Screen Mode 169/ Wide Zoom/Zoom/43Hdmi Black Level Normal/Low Mode Standard/Music/Movie/Speech/Custom Sound FeaturesEqualizer Balance/100Hz/300Hz/1kHz/3kHz/10kHz SRS TS XT Off/OnAuto Volume Off/On Selecting the Sound ModeTV Speaker Off/On Setting the Sleep Timer Setting and Displaying the Current TimePress Auto Power Off Switching the Television On and Off AutomaticallyChoosing Your Language Press the Menu button to display the on-screen menuMelody / Energy Saving TV power on/off melody sound can be adjustedMelody Off/Low/Medium/High Melody does not playSelecting the Source Edit Name Editing the Input Source NamesPreviewing the DTV Menu System Updating the Channel List Manually Services or if you move the TV to a new locationEnter You can specify the channel for a fast channel searchDescription Editing Your Favourite ChannelsPreview Renumber depending on the countryDelete Displaying Programme Information Selecting Channel ListThen Viewing the EPG Electronic Programme Guide InformationSetting the Default Guide Using the Scheduled ListYou can preset the default guide style Viewing All Channels and Favourite Channels Adjusting the Menu TransparencyEnter your current 4-digit PIN code by using the numeric Setting up the Parental LockYou can change it later, if necessary Change PINSetting the Subtitle Mode Setting the SubtitleSelecting the Audio Format You can activate and deactivate the subtitlesSelecting the Digital Text UK only Selecting the Audio DescriptionPress the Enter button Press the Exit button to exit Viewing Product Information Selecting the Time Zone Spain onlySelect the local time zone Upgrading the Software Checking the Signal InformationSelecting the CI Common Interface Menu Viewing Common InterfaceSelecting the Preferred Language Subtitle, Audio or Teletext ResettingThis menu consists of 6 sub-menus PreferenceDisplay Modes Setting up Your PC Software Based on Windows XPSub Input HDMI/DVI InputPreset Press the Source button to select PC mode Setting up the TV with your PCAuto Adjustment Image ResetTeletext Feature Locking direction Figure Using the Anti-Theft Kensington Lock depending on the modelTo avoid the TV from falling Securing the TV to the WallDepending on the type of wall WallTroubleshooting Before Contacting Service Personnel Technical and Environmental Specifications