Displaying the Teletext Information
You can display Teletext information at any time, but signal reception must be good. Otherwise:
Information may be missing.
Some pages may not be displayed.
To activate the Teletext mode and display the contents page:
1. Using the P ( ) or P ( ) button, select the channel providing the Teletext service.
2. Press the TTX/MIX ( ) button to activate the Teletext mode.
The contents page is displayed. It can be redisplayed at any time by pressing the MENU ( ) button.
3. Press the TTX/MIX ( ) button again.
The actual broadcast will be displayed simultaneously with the Teletext page on the screen.
4. Press the TV( ) button again to exit from the Text display.
If any broken character appears while Text is being viewed, make sure that the
Text language is identical with the language in the “Setup” menu mode. If both languages are different, select the same language with the Text language on the “Setup” menu.
Selecting a Specific Teletext Page
Press the number buttons on the remote control to enter the page number directly:
1. Enter the
2. If the selected page is linked with several secondary pages, the secondary pages are displayed in sequence. To freeze the display on a given page, press the ( ). Press the ( ) button again to resume.
3. Using the various display options:
To display... | Press the... |
| ||
Both Teletext information and the normal broadcast | TTX/MIX ( | ) | ||
Hidden text (answers to quiz games, for example) | INFO ( | ) |
| |
The normal screen | INFO ( | ) |
| |
A secondary page, by entering its | ADD/DEL ( | ) | ||
The next page | P | ( | ) |
|
The previous page | P | ( | ) |
|
SLEEP ( | ) |
| ||
Upper half of the screen |
| Once |
|
|
Lower half of the screen |
| Twice |
|
|
Normal screen |
| Three times |
|