Using Fastext to Select a Teletext Page
The various topics included in the Teletext pages are
1. Display the Teletext contents page by pressing the
TTX/MIX ( ) button.
2.Press the coloured button corresponding to the topic that you wish to
select (The available topics are listed on the status information line).
3. Press the Red button to display the previous page. Press the Green button to display the next page.
4.Press the TV( ) button again to exit from the Text display.
Setting up Your PC Software (Based on Windows XP)
The Windows
1.First, click on “Control Panel” on the Windows start menu.
2.When the control panel window appears, click on “Appearance and Themes” and a display
3.When the control panel window appears, click on “Display” and a display
4.Navigate to the “Settings” tab on the display
If a
Display Modes
Both screen position and size will vary depending on the type of PC monitor and its resolution.
The resolutions in the table are recommended. (All resolutions between the supported limits are supported)
Mode | Resolution | Horizontal | Vertical | Pixel Clock | Sync Polarity |
|
| Frequency (kHz) | Frequency (Hz) | Frequency (MHz) | (H/V) |
IBM | 640 x 480 | 31.469 | 59.940 | 25.175 | |
| 720 x 400 | 31.469 | 70.087 | 28.322 | |
|
|
|
|
|
|
VESA | 800 x 600 | 37.879 | 60.317 | 49.500 | + /+ |
| 1024 x 768 | 48.364 | 60.000 | 65.000 | |
| 1024 x 768 | 56.476 | 70.069 | 75.000 | |
| 1360 x 768 | 47.712 | 60.015 | 85.800 | + /+ |
|
|
|
|
|
|
The interlace mode is not supported.
The set might operate abnormally if a
HDMI/DVI does not support PC function.
Separate and Composite modes are supported. SOG is not supported.