Samsung LN52A540P2F, LN40A540P2F, LN46A540P2F setup guide Connecting a VCR

Page 5

Connecting a VCR

Video Connection

TV Side Panel

TV Rear Panel

VCR Rear Panel

3

RF Cable

(Not supplied)

5 Audio Cable (Not supplied)

4 Video Cable (Not supplied)

Follow the instructions in “Viewing a VCR or Camcorder Tape” to view your VCR tape.

Each VCR has a different back panel configuration.

When connecting a VCR, match the color of the connection terminal to the cable.

1

Unplug the cable or antenna

from the back of the TV.

2

Connect the cable or antenna

to the ANT IN terminal on the

 

back of the VCR.

3

Connect an RF Cable between

the ANT OUT terminal on the

VCR and the ANT IN terminal

 

on the TV.

4

Connect a Video Cable

between the VIDEO OUT jack

on the VCR and the AV IN 1

 

[Y/VIDEO] or AV IN 2 [VIDEO]

 

jack on the TV.

5

Connect Audio Cables between

the AUDIO OUT jacks on the

VCR and the AV IN 1 (or AV IN 2)

[R-AUDIO-L] jacks on the TV.

If you have a “mono” (non-stereo) VCR, use a Y-connector (not supplied) to connect to the right and left audio input jacks of the TV. Alternatively, connect the cable to the “R” jack. If your VCR is stereo, you must connect two cables.

When connecting to AV NI 1, the color of the AV IN 1 [Y/VIDEO] jack (Green) does not match the color of the video cable (Yellow).

S-Video Connection

TV Side Panel

TV Rear Panel

VCR Rear Panel

To begin, follow steps 1–3 in

1 the previous section to connect the antenna or cable to your VCR and your TV.

 

 

2

Connect an S-Video Cable

 

 

between the S-VIDEO OUT jack

 

 

on the VCR and the AV IN 2

 

 

 

[S-VIDEO] jack on the TV.

 

 

3

Connect Audio Cables between

 

 

the AUDIO OUT jacks on the VCR

 

 

 

and the AV IN 2 [R-AUDIO-L]

 

 

 

jacks on the TV.

 

 

An S-Video cable may be included

1

RF Cable

with a VCR. (If not, check your local

(Not supplied)

electronics store.)

 

S-Video Cable

Each VCR has a different back

2

 

panel configuration.

(Not supplied)

 

 

 

When connecting a VCR, match

3

Audio Cable

 

the color of the connection

 

terminal to the cable.

(Not supplied)

 

English-

Image 5
Contents LN40A540P2F/LN46A540P2F LN52A540P2F Rear Panel / Side Panel JacksComponent in 1, 2 / AV PC in PC / Audio AV in 2, S-VIDEORemote Control Hdmi in 1, 2 or 3 jack on Receiver Set-Top Box What is HDMI?Connect a DVI to Hdmi Cable or DVI-HDMI Adapter betweenConnect a Component Cable between Component in 1 or Connecting a CamcorderConnect Audio Cables between Connect a Video Cable or S-VideoConnecting a VCR Connecting an Amplifier/DVD Home Theater Connecting a Digital Audio SystemUsing the D-Sub Cable Connecting a PCUsing the HDMI/DVI Cable Connect an HDMI/DVI cable betweenViewing the Menus Turning the TV On and OffStoring Channels in Memory Automatic Method To Stop the Auto Program FunctionCustomizing the Picture Settings Setting the Channel ListPicture Mode Picture AdjustmentTo Select the Source Press the Source button on the Remote ControlProblem TroubleshootingPossible Solution Poor picture Poor sound quality No picture or soundContact Samsung Worldwide Service 55 Standish Court MississaugaContacte con Samsung Worldwide Samsung Electronics Canada Inc., Customer