Connecting the 3CXE589ET CardBus PC Card with XJACK Connector |
Connecting the 3CXE589ET CardBus PC Card with XJACK Connector
1Remove all PC Cards from your notebook and turn it on.
2Connect the network cable ➀ to the CardBus PC Card
XJACK connector.
Figure 1-3 Connecting the CardBus PC Card
3Insert the
4Insert the PC Card into the CardBus PC Card slot ➂.
Slide it all the way in.
CAUTION: Do not force the CardBus PC Card into the slot or you may bend the pins inside the slot. If the CardBus PC Card doesn’t fit into the slot, make sure that your notebook has a CardBus slot. Refer to your notebook documentation and contact your notebook manufacturer for more information.
You may see Windows 95 prompts for driver installation.
The final installation step is to install the network driver that allows you to login to the network. For instructions on how to install the network driver, go to Chapter 2.