3Com Series 760 manual Windows NT 4.0 without Networking Installed, Click Yes

2-8CHAPTER 2: INSTALLING THE NETWORK DRIVER

Confirming Installation

To confirm successful installation, double-click the Network icon in the Control Panel. Click the Adapters tab. The 3Com Megahertz 10/100 LAN CardBus PC Card should appear on the list. If it doesn’t appear, see Chapter 3 for troubleshooting information.

Windows NT 4.0 without Networking Installed

If Windows NT networking is not installed, obtain the following information from your MIS department.

■Are you on a local area network or are you using a modem?

■Transport and network layer protocol used in the Microsoft Windows Network

■Name of the NT Server domain or workgroup you belong to

■IP address if you are not using DHCP

1Make sure the CardBus PC Card is installed and connected to the network, as described in Chapter 1.

If the CardBus PC Card is automatically detected by Windows NT, you may have Card Services installed. Refer to your Card Services documentation to see if it supports the CardBus PC Card. If it does not support it, consult your Card Services documentation to remove Card Services.

2Using the Control Panel, double-click Network.

When Windows NT networking is not installed, you are asked if you want to install Windows NT networking.

3Click Yes.

4Select Wired to the Network and click Next.

5Click Select from list.

6Click Have Disk.

7Insert the LAN Installation Disk.

8Type a: and click OK.

3Com Megahertz 10/100 LAN CardBus PC Card appears in the Select OEM Option window.