3Com Series 760 manual Windows for Workgroups WFW

2-12CHAPTER 2: INSTALLING THE NETWORK DRIVER

11Click OK to accept the default settings for the CardBus PC Card or enter new settings if requested by your MIS department.

The Network Settings Window appears.

12Click OK to bring up the TCP/IP configuration window.

13Enter the IP address.

14Click OK.

If networking has not been installed, follow the prompts to complete networking installation.

15Remove the LAN Installation Disk and click Restart Now to complete installation.

The network driver installation is complete. To confirm successful installation use the File Manager to browse the network.

Windows for Workgroups (WFW)

Before you begin installing the network driver, obtain the LAN Installation Disk and Windows for Workgroups v3.11 installation files (on hard disk, floppy diskettes, or CD-ROM). The LAN Installation Disk contains a subdirectory structure and files that make it an OEM import disk for WFW.

Ask your MIS department for the following information:

■Which NDIS driver should you install - the NDIS 3 DOS enhanced-mode driver or the NDIS 2.0 16-bit DOS real-mode driver?

■Transport and Network protocol layer used in the Microsoft Windows Network

■WFW 3.11 workgroup name

If you installed any other network adapter or network driver in the notebook, consult your system administrator for further instructions.