3Com Series 760 manual Windows 95 Versions 4.00.950 and 4.00.950A

2-4CHAPTER 2: INSTALLING THE NETWORK DRIVER

6In the Update Device Driver Wizard, click Finish.

7In the Insert Disk window, click OK.

8In the copying files window, type a: and click OK.

9If prompted, insert the Windows 95 CD-ROM or type the directory path to the Windows 95 CAB files on your notebook and click OK.

10Remove the LAN Installation Disk and restart the notebook.

The network driver installation is complete. To confirm installation, see the section “Confirming Installation.” If you have problems, go to Chapter 3.

Windows 95 (Versions 4.00.950 and 4.00.950A)

You install the NDIS network driver when your notebook is running Windows 95. This driver can be used in Microsoft and NetWare environments.

1Make sure the CardBus PC Card is inserted and connected to the network, as described in Chapter 1.

2Double-clickMy Computer, Control Panel, and then double-clickAdd New Hardware.

3In the Add New Hardware Wizard window, click Next.

4Respond to the “Do you want Windows to search for your new hardware” prompt by clicking “No” and then click Next.

5Double-click on Network Adapters in the list that appears.

6In the Select Device window, click the Have Disk button.

7Insert the LAN Installation Disk in the floppy drive and click OK.

8Select 3Com Megahertz 10/100 LAN CardBus PC Card Manual Load and click OK to copy the CardBus PC Card files to your notebook.

9In the New Hardware Wizard Window, click Next.