![](/images/new-backgrounds/1120864/12086497x1.webp)
4 | CHANGING CONFIGURATION |
|
This chapter describes how to display and change configuration settings for the CardBus PC Card.
Before you change these settings, contact your MIS department.
Configuration Settings
Table
.
Table
Option | Default Setting | Available Settings |
|
|
|
Duplex | Auto Select | Auto Select, full duplex |
Media Type | Auto Select | Auto Select |
CIS Memory Address | 0090h - 00FFh | 256 Bytes |
I/O Base Address | 3000h | 3000h, 3040h, 3080h, 30C0h |
|
| 3100h, 3140h, 3180h, 31C0h |
|
| 3200h, 3240h, 3280h, 32C0h |
|
| 3300h, 3340h, 3380h, 33C0h |
|
| 3400h, 3440h, 3480h, 34C0h |
|
| 3500h, 3540h, 3580h, 35C0h |
Interrupt Request Level | 9 | 5, 7, 9, 10, 11, 12 |
|
|
|
Configuration Setting Descriptions
Duplex
Full duplex allows the CardBus PC Card to send and receive data between the CardBus PC Card and the switch connection at the same time. If the switch supports the NWay feature and full duplex, the CardBus PC Card automatically runs in full duplex (Auto Select).
Media Type
The Media Type is Auto Select.