Storing Channels Automatically
You can scan for the frequency ranges available to you (and availability depends on your country). Automatically allocated programme numbers may not correspond to actual or desired programme numbers.
However you can sort numbers manually and clear any channels you do not wish to watch.
1Press the MENU button.
Result: The main menu is displayed.
2Press the 
or 
button to select the Channel.
Result: The options available in the Channel group are displayed.
3Press the ENTER
button.
4Press the 
or 
button to select ATM. Press the ENTER
button.
Result: The Start is selected.
5Press the ENTER
button to search the channels.
The sub menu is changed from Start to Stop with channel search started.
Result: The search will end automatically.
Channels are sorted and stored in an order which reflects their position in the frequency range, (with lowest first and highest last). The programme originally selected is then displayed.
To return to the previous menu, press 
or 
button to select Return and then press ENTER
button.
To stop the search before it has finished, press the ENTER
button to search the channels.
6When the channels have been stored, you can:
Add or delete the channels (refer to page 22) Sort them in the order required (refer to page 23) Assign a name to the stored channels (refer to page 24) Fine tune channel reception if necessary (refer to page 25)