Viewing the Connection Panel (continued)
ŒConnecting an Aerial or Cable Television Network (depending on the model)
To view television channels correctly, a signal must be received by the set from one of the following sources:
-An outdoor aerial
-A cable television network
-A satellite network
´Connecting DTV Set-Top Box, VCR, or DVD
-Connect the DTV, VCR, or DVD SCART cable to the SCART connector of the DTV, VCR, or DVD.
-If you wish to connect both the DTV
ˇConnecting Computer
-Connect the 15 Pin
-Connect the stereo audio cable to ”Audio (ST)” on the rear of your set and the other end to “Audio Out” of the sound card on your computer.
-If necessary, please install monitor driver contained on the accompanied CD. For more information, refer to the driver installation instructions included with your CD package.
➣ 15 Pin D-SUB connector
Pin | Separate H/V | Composite H/V |
|
|
|
1 | Red (R) | Red (R) |
2 | Green (G) | Green (G) |
3 | Blue (B) | Blue (B) |
4 | Grounding | Grounding |
5 | Grounding (DDC return) | Grounding (DDC return) |
6 | Grounding - Red (R) | Grounding - Red (R) |
7 | Grounding - Green (G) | Grounding - Green (G) |
8 | Grounding - Blue (B) | Grounding - Blue (B) |
9 | No connection | No connection |
10 | Grounding - Sync. / Self test | Grounding - Sync. / Self test |
11 | Grounding | Grounding |
12 | DDC - SDA (Date) | DDC - SDA (Date) |
13 | Horizontal Sync. | Horizontal/Vertical Sync. |
14 | Vertical Sync. | Not used |
15 | DDC - SCL (Clock) | DDC - SCL (Clock) |
|
|
|