Troubleshooting: Before Contacting Service Personnel
In PC mode, the image is not stable and may appear to vibrate.
◆Check that the display resolution and frequency from your computer or video board is an available mode for your set. On your computer check: Control Panel, Display, Settings.
◆If the setting is not correct, use your computer utility programme to change the display settings.
Your set supports multiscan display functions within the following frequency domain:
Horizontal frequency - | 30 | ~ | 68 kHz |
Vertical frequency - | 56 | ~ | 85 Hz |
Maximum refresh rate - | 1280 x 768 @ 60Hz |
In PC mode, the image is not centred on ◆ Adjust the horizontal and vertical position. the screen.
PowerSaver
This set has a
The available modes are “On”, “Standby”, “Sleep”, and “Deep Sleep”. PowerSaver operates with a VESA DPMS compliant video card installed in your computer. You use a software utility installed on your computer to set up this feature.
State | Normal Operation | ||
(EPA/NUTEK) | |||
|
| ||
|
|
| |
Horizontal Sync | Active | Inactive | |
|
|
| |
Vertical Sync | Active | Inactive | |
|
|
| |
Power Indicator | Green | Green, Blinking (1 sec interval) | |
|
|
| |
Power Consumption | 52 W (Normal) | Less than 3 W | |
|
|
|
➣This set automatically returns to normal operation when horizontal and vertical sync are restored.
This occurs when you move the computer’s mouse or press a key on the keyboard.