Samsung UC7000 user manual Troubleshooting, Issues Solutions and Explanations

Page 56

Other Information

Troubleshooting

If you have any questions about the TV, first refer to this list. If none of these troubleshooting tips apply, please visit “www. samsung.com,” then click on Support, or contact the call centre listed on the back-cover of this manual.

Issues

Solutions and Explanations

Picture Quality

First of all, please perform the Picture Test and confirm that your TV is properly displaying test image.

 

(go to MENU - Support - Self Diagnosis - Picture Test) (p. 24)

 

If the test image is properly displayed, the poor picture may caused by the source or signal.

 

 

The TV image does not look as good as it

• If you have an analogue cable/set top box, upgrade to a digital set top box. Use HDMI or Component

did in the store.

cables to deliver HD (high definition) picture quality.

 

• Cable/Satellite subscribers: Try HD stations from the channel line up.

 

• Antenna connection: Try HD stations after performing Auto programme.

 

Many HD channels are up scaled from SD(Standard Definition) contents.

 

• Adjust the Cable/Set top box video output resolution to 1080i or 720p.

 

• Make sure you are watching the TV at the minimum recommended distance based on the size and

 

definition of the signal.

 

 

The picture is distorted: macro block error,

• Compression of video contents may cause picture distortion especially in fast moving pictures such

small block, dots, pixelization

as sports and action movies.

 

• Low signal level or bad quality can cause picture distortion. This is not a TV issue.

 

 

Colour is wrong or missing.

• If you’re using a component connection, make sure the component cables are connected to the

 

correct jacks. Incorrect or loose connections may cause colour problems or a blank screen.

 

 

There is poor colour or brightness.

• Adjust the Picture options in the TV menu. (go to Picture mode / Colour / Brightness / Sharpness)

 

(p. 15)

 

• Adjust Energy Saving option in the TV menu. (go to MENU - Picture - Eco Solution -

 

Energy Saving) (p. 15)

 

• Try resetting the picture to view the default picture settings. (go to MENU - Picture - Picture Reset)

 

(p. 19)

 

 

There is a dotted line on the edge of the

• If the picture size is set to Screen Fit, change it to 16:9. (p. 16)

screen.

• Change cable/set top box resolution.

 

 

The picture is black and white.

• If you are using an AV composite input, connect the video cable (yellow) to the Green jack of

 

component input 1 on the TV.

 

 

When changing channels, the picture

• If connected with a cable box, please try to reset the cable box. Reconnect the AC cord and wait until

freezes or is distorted or delayed.

the cable box reboots. It may take up to 20 minutes.

 

• Set the output resolution of the cable box to 1080i or 720p.

 

 

Sound Quality

First of all, please perform the Sound Test to confirm that your TV audio is properly operating.

 

(go to MENU - Support - Self Diagnosis - Sound Test) (p. 24)

 

If the audio is OK, the sound problem may caused by the source or signal.

 

 

There is no sound or the sound is too low

• Please check the volume the of external device connected to your TV.

at maximum volume.

 

 

 

The picture is good but there is no sound.

• Set the Speaker Select option to TV Speaker in the Sound menu. (p. 21)

 

• If you are using an external device, make sure the audio cables are connected to the correct audio

 

input jacks on the TV.

 

• If you are using an external device, check the device’s audio output option (ex. you may need to

 

change your cable box’s audio option to HDMI when you have a HDMI connected to your TV).

 

• If you are using a DVI to HDMI cable, a separate audio cable is required.

 

• If your TV has a headphone jack, make sure there is nothing plugged into it.

 

 

The speakers are making an inappropriate

• Check the cable connections. Make sure a video cable is not connected to an audio input.

noise.

• For antenna or cable connections, check the signal strength. Low signal level may cause sound

 

distortion.

 

 

56 English

Image 56
Contents Contact Samsung Worldwide BN68-02831A-01Securing the Installation Space Installation with a standInstallation with a wall-mount Still image warningContents Accessories Yy Cable Tie Yy Holder-Wire 3EAYy Blanking Bracket & Screw 1EA Yy Holder-Ring 4EA Yy Antenna Adapter Yy Optical AdapterButtons on the remote control Buttons on the remote control PPowerStandby mode Viewing the Control PanelReturns to the previous menu Viewing the Remote ControlTurns the TV on and off Have direct access to channels Connecting to an Antenna Connecting to an AV Device ConnectionsVCR Connecting to an Audio Device Source ListEdit Name Changing the Input SourceHow to Navigate Menus Using the Info button Now & Next guideGuide Planning Your ViewingUsing Scheduled View Channel Manager359 ORF2 An analogue channel. c a channel selectedMy Channels Channel ListCountry Auto StoreEdit Channel Number Disable / Enable ScheduledChannel List Transfer Fine TuneMode Eco SolutionAdvanced Settings Film Mode Off 200Hz Motion Plus Picture OptionsPicture Options Size Your cable box/satellite receiverViewing TV using the 3D function Available only in Hdmi mode RGB signalsEnglish Basic Features Digital Noise Filter Off / Low / Medium / High / AutoSupport resolution 169 only Resolution Frequency Hz Displays the images for60 Hz Right eye alternately in rowsHow to watch the 3D image UMove E Enter e ExitPicture Reset OK / Cancel Auto Adjustment tScreen SRS TheaterSound tAuto Volume Off / Normal / Night Additional SettingSound Reset OK / Cancel Audio Format Mpeg / Dolby DigitalTime SecurityOther Features Language Digital Text Disable / EnableWireless Remote Control SubtitleSoftware Upgrade Software UpgradePIP t Self DiagnosisInstalling the Latest Version By USB Insert a USB By Online Upgrade the software using the InternetDrive containing the firmware upgrade file HD Connection GuideConnecting to a PC Using an HDMI/DVI Cable / a D-sub CableMode Resolution Horizontal Frequency Vertical Frequency Sync PolarityConnecting to a Wired Network Network ConnectionNetwork Setup Auto Network Setup ManualNetwork Setup Network Type Wired Network Setup Network TestConnecting to a Wireless Network Network Setup Samsung Auto Configuration AgainDelete Network Setup PBC WPSSecurity Key Entered ~9 Number Network Setup Ad-Hoc SWLSamsung Wireless Link Advanced Features EnglishSWL connect Device to connectConnecting a USB Device Connecting to the PC through networkMedia Play Your PCPage Sorting standard is different depending on the contents Recorded TVScreen Display Enter Ebutton in the Media Play menuPage Videos Yy Supported Video FormatsName File extension Format MbspDuring playing the music, you can search using MusicPress the /// button to select the desired file in the file ButtonMedia Play Additional Function PhotosPlaying the Multiple Files Settings Anynet+ Anynet+Home Theatre Device Hdmi CableSetting Up Anynet+ Switching between Anynet+ DevicesRecording Listening through a ReceiverTroubleshooting for Anynet+ Getting Started with Internet@TV Internet@TVSetting up Internet@TV LoginManager SitesUsing the Internet@TV service Using the colour buttons with the Samsung AppsSamsung Apps SkypeTroubleshooting for internet@TV Problem Possible Solution Some application contents onlyCheck with that service provider Help WebsiteSetup Setting Up AllShareMessage / Media / ScreenShare About AllShareSetup My MobileAnalogue Channel Teletext Feature Blanking Bracket Installing the Wall MountAssembling the Cables Inches Quantity19~22 23~29Securing the TV to the wall To Avoid the TV from FallingAnti-theft Kensington Lock Troubleshooting Issues Solutions and ExplanationsOn, refer to The remote control does not work below There is no signalMake sure your connected devices are powered on There is picture/VideoContents Volume Mode Not Supported messageSetup → ENTEREp Degree connectorsLicence Specifications AllShare Amplify Anynet+ Favourite Channel Film Mode Fine Tune Flesh Tone FrequencyIndex This page is intentionally Left blank