Samsung TX-T2781 manual Connecting a VCR, Connecting a Camcorder, Video Connection

Page 7

Connecting a VCR

Video Connection

These instructions assume that you have already connected your TV to an antenna or a cable TV system(according to the instructions on page 6). Skip step 1 if you have not yet connected to an antenna or a cable system.

➢Each VCR has a different back panel configuration.

When connecting a VCR, match the color of the connection terminal to the cable.

1Unplug the cable or antenna from the back of the TV.

2Connect the cable or antenna to the ANT IN terminal on the back of the VCR.

3Connect an Antenna cable between the ANT OUT terminal on the VCR and the ANT IN (AIR/CABLE) terminal on the TV.

4Connect a Video Cable between the VIDEO OUT jack on the VCR and the AV IN 1 [VIDEO] jack on the TV.

5Connect Audio Cables between the AUDIO OUT jacks on the VCR and the AV IN 1 [L-AUDIO-R] jacks on the TV.

➢If you have a “mono” (non-stereo) VCR, use a Y-connector(not supplied) to hook up to the right and left audio input jacks of the TV. If your VCR is stereo, you must connect two cables.

➢Also, you can connect to AV IN 2 on the side panel of TV.

 

 

Rear of the TV

VCR

 

 

 

5

Audio Cable

2

 

(Not supplied)

 

 

4

Video Cable(Not supplied)

3

Antenna cable(Not supplied)

Connecting a Camcorder

The side panel jacks on your TV make it easy to connect a camcorder to your TV. They allow you to view the camcorder tapes without using a VCR.

➢Each Camcorder has a different back panel configuration.

When connecting a Camcorder, match the color of the connection terminal to the cable.

1Connect a Video Cable between the AV IN 2 [VIDEO] jack on the TV and the VIDEO OUT jack on the camcorder.

2 Connect Audio Cables between the AV IN 2 [L-AUDIO-R] jacks on the TV and the AUDIO OUT jacks on the camcorder.

 

Side of the TV

1

Video Cable(Not supplied)

Camcorder

 

2

Audio Cable(Not supplied)

English - 7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Owner’s Instructions Contents Viewing the Control Panel Accessories Headphone Viewing the Connection Panel Rear of the TV Side of the TV AV in 1 / AVRemote Control Connecting Cable TV Connecting VHF and UHF AntennasConnecting a Camcorder Connecting a VCRVideo Connection Connecting an Amplifier/DVD Home Theater Analog Connecting a DVD Player/Set-Top BoxPress the Enter button, then the Language menu is displayed Plug & Play FeatureWhen selecting Cable TV If you want to reset this featureMemorizing the Channels Selecting the Video Signal-sourceStoring Channels in Memory Automatic Method Dynamic Using Automatic Picture SettingsTo Select the Source To Edit the Input Source NameCool1 Resetting the Picture Settings to the Factory DefaultsChanging the Screen Size Digital Noise ReductionCustomizing the Sound Using Automatic Sound SettingsChoosing a Multi-Channel Sound MTS Track Analog Automatic Volume ControlReduces the differences in volume level among broadcasters Choosing a Multi-Channel Sound MTS Track DigitalAdding and Erasing Channels Analog Using Pseudo StereoUsing Turbo Plus Clearing Scrambled Channels DigitalAir Added Delete Ch.Change Enter Fine Tuning Analog Channels AnalogAdding and Erasing Channels Digital Labeling Channels AnalogSurf Checking the Digital-Signal Strength DigitalUsing the R.Surf Feature Selecting a Menu LanguageAuto Power Off Setting the TimeSetting the Sleep Timer To cancel the set sleep timerDigital Captions function operates on digital channels Size DefaultViewing Closed CaptionsOn-Screen Text Messages Digital Viewing Closed CaptionsOn-Screen Text Messages AnalogDefault PIN of a new TV set is Setting the Blue Screen ModeSetting the On/Off Melody Using the V-ChipChange PIN Setting Up Your Personal ID NumberPINBlock All Downloadable U.S. RatingHumor Level Allow AllSDStandard Definition grade Identifying ProblemsPlease check the digital signal strength and input antenna Upgrading the SoftwareWeb Site Address SpecificationsContact Samsung WORLD-WIDE Country
Top Page Image Contents