Setup and Reset
Safety Screen
The screen protection feature allows you to prevent image retention on the screen when a stationary image is displayed on the product screen for a long period of time.
Setting Pixel Shift
1.Press [m] on the product.
2.Move to Setup using the [
] buttons. Next, press the [
] button.
3.Move to Safety Screen using the [
] buttons. Next, press the [
] button.
4.Move to Pixel Shift using the [
] buttons. Next, press the [
] button.
The following screen will appear.
Pixeli l Shifti
| Pixel Shift | : |
|
|
| Off |
| ||
| Horizontal | : | On4 |
|
| Vertical | : 4 |
| |
| Time | : 4 min |
| |
| Move | Enter | Return | |
| ||||
|
|
|
|
|
• Pixel Shift: To prevent
• Horizontal: Sets how many pixels the screen moves horizontally. Five adjustment levels: 0, 1, 2, 3, and 4.
• Vertical: Sets how many pixels the screen moves vertically. Five adjustment levels: 0, 1, 2, 3, and 4.
• Time: Set the time interval for performing the horizontal or vertical movement, respectively.
5.Configure the settings as required using the [
] buttons.
Configuring Timer
1.Press [m] on the product.
2.Move to Setup using the [
] buttons. Next, press the [
] button.
3.Move to Safety Screen using the [
] buttons. Next, press the [
] button.
4.Move to Timer using the [
] buttons. Next, press the [
] button.
The following screen will appear.
Timeri
|
|
|
|
|
|
| Timer | : | 동Off작 |
| |
| Mode | : | On |
| |
| Period | : 1 | Hour | ||
| Time | : 10 sec | |||
| Move | Enter |
| Return | |
|
| ||||
|
|
|
|
|
|
• Timer: You can set the timer for Screen Burn Protection.
The image retention elimination mode automatically deactivates after a specified period of time.
• Mode: You can change the Safety Screen Type. Bar / Eraser / Pixel
• Period: Use this function to set the execution period for each mode set in the timer.
• Time: Within the set period of time specify a time for execution. 10 sec / 20 sec / 30 sec / 40 sec / 50 sec
5.Configure the settings as required using the [
] buttons.
33