Samsung PN50C430, PN42C430 user manual License

Page 34

Other Information

Issues

Solutions and Explanations

Image Retention (Burn In) Issue.

• To minimize the possibility of screen burn, this unit is equipped with screen burn reduction technology.

 

Pixel Shift technology enables you to set picture movement up/down (Vertical Line) and side to side

 

(Horizontal Dot).

 

 

The cable/set top box remote control

• Program the Cable/Set remote control to operate the TV. Refer to the Cable/Set user manual for the

doesn’t turn the TV on or off, or adjust the

SAMSUNG TV code.

volume.

 

 

 

Caption on TV menu is greyed out.

• Caption can not be selected in the TV menu when connected via HDMI or Component (p. 20).

 

• Caption must be activated on the external device (p. 20).

 

 

A “Mode Not Supported” message

• Check the supported resolution of the TV, and adjust the external device’s output resolution

appears.

accordingly. Refer to the resolution settings on page 10 of this manual.

 

 

There is a plastic smell from the TV.

• This smell is normal and will dissipate over time.

 

 

The TV Signal Strength is unavailable in

• This function is only available with digital channels from an Antenna / RF/Coax connection (p. 21).

the Self Diagnostic Test menu.

 

 

 

The TV is tilted to the side.

• Remove the base stand from the TV and reassemble it.

 

 

The channel menu is greyed out

• The Channel menu is only available when the TV source is selected.

(unavailable).

 

 

 

Your settings are lost after 30 minutes or

• If the TV is in the Store Demo mode, it will reset audio and picture settings every 30 minutes. Change

every time the TV is turned off.

the settings from Store Demo mode to Home Use mode in the Plug & Play procedure. Press the

 

SOURCE button to select TV mode, and go to MENU → Setup → Plug & Play → ENTERE(p. 8).

 

 

You have intermittent loss of audio or

• Check the cable connections and reconnect them.

video.

• Loss of audio or video can be caused by using overly rigid or thick cables. Make sure the cables are

 

flexible enough for long term use. If mounting the TV to a wall, we recommend using cables with 90

 

degree connectors.

 

 

You see small particles when you look

• This is part of the product’s design and is not a defect.

closely at the edge of the frame of the TV.

 

 

 

POP (TV’s internal banner ad) appears on

• Select Home Use under Plug & Play mode. For details, refer to Plug & Play Feature (p. 8).

the screen.

 

 

 

Some of above pictures and functions are available at specific models only.

License

TruSurround HD, SRS and symbol are trademarks of SRS Labs, Inc.

TruSurround HD technology is incorporated under license from SRS Labs, Inc.

Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories.

Open Source License Notice

In the case of using open source software, Open Source Licenses are available on the product menu. Open Source License Notice is written only English.

34 English

Image 34
Contents Samsung Electronics America, Inc Challenger Samsung Electronics Canada Inc., Customer ServiceBN68-02576A-04 User Instructions EnglishContents Getting Started List of FeaturesAccessories 3301-002049Install the Stand Product color and shape may vary depending on the model Buttons on the remote controlViewing the Control Panel Source EDisplays and selects the available video sources p Viewing the Remote ControlMode Press to select the picture mode p CC Controls the caption decoder pPower Input Connecting to an AntennaPlug & Play Initial Setup Press the or button, then press the ENTEREbutton. SelectConnections Connecting to an AV DeviceHdmi in 1DVI, 2, DVI Audio Using an HDMI/DVI cable Connecting to an Audio DeviceConnecting to a PC Digital Audio OUT OpticalChanging the Input Source Source ListEdit Name EntereChannel List Basic FeaturesHow to Navigate Menus Channel MenuAuto Program Add to Favorite / Delete from FavoriteAntenna Air / Cable t Clear Scrambled ChannelMode ProgrammedFine Tune Picture MenuPicture Options Advanced SettingsAdvanced Settings Picture OptionsMode t Picture Reset Reset Picture Mode / CancelSound Menu Equalizer Auto Volume Off / OnSound Reset Reset All / Reset Sound Mode / Cancel SRS TruSurround HD Off / OnTimer ChipCanadian French You can block TV programs Contains themes or content which may not beBasic Features English Xx Allow All Press to unlock all TV ratingsOO MENUm→ Setup → Entere Game Mode Off / On→ 2 → 4 → POWERon LanguageEnergy Saving Off / Low / Medium / High Software UpgradeMelody Off / Low / Medium / High Eco Sensor Off / OnAdvanced Features Media PlayPhotos Music MusicSelect Fast, Normal or Slow SetupUsing the Setup Menu Select an MP3 file as the background musicTV Rear Panel Anynet+ Device Home Theater Anynet+Hdmi cable Optical cable Shows the Anynet+ device list Changes Anynet+ mode to TV broadcast modeOO MENUm→ Application → Anynet+ HDMI-CEC → Entere Setup DVD recorder will appearWhen a tuner-embedded Anynet+ device is not connected Initial setup, etcOn in the Anynet+ Setup menu Message Connecting toOther Information English Installing the Wall MountOther Information Blanking BracketQuantity Securing the Installation SpaceProduct Family Inches Vesa Spec 80~TV-Holder BN96-15753A Securing the TV to the WallTV-Holder Kit Sold Separately Screw M8 x L19Troubleshooting Issues Solutions and ExplanationsMake sure your connected devices are powered on On, refer to Remote control does not work belowThere is no signal ContentsLicense Specifications Dimensions Antenna Anynet+ Favorite Channel Film Mode Fine Tune Flesh Tone FrequencyIndex Audio OUTThis page is intentionally Left blank