Install the Stand
See separate guide for installing the stand.
(M4 X L16)
Stand (1EA) | Guide Stand (1EA) | Screws (10EA) |
Follow the steps below to connect the TV to the stand.
Screws (M4 X L16) | Top view | s | s |
|
|
| |||
|
| s | s |
|
|
|
| s |
|
Guide Stand |
|
| s | s |
|
|
|
| |
|
|
|
| s |
Stand |
|
|
|
|
2 |
Rear | 1 | |
Screws (M4 X L16) | ||
|
1. Connect the Guide Stand to the Stand | 2. With your TV upright, connect | 3. Fasten two screws (M4 X L16) |
using six screws (M4 X L16). | the TV to the Stand. | at position 1, and then fasten |
|
| two screws (M4 X L16) at |
|
| position 2. |
✎✎NOTE
xx Make sure to distinguish between the front and back of the Stand and Guide Stand when assembling them. xx Make sure that at least two persons lift and move the PDP TV.
xx Stand the product up and fasten the screws. If you fasten the screws with the PDP TV placed down, it may lean to one side.
[[Do not insert your fingers into the stand base slot of the TV when installing the stand base.
01 Getting Started