Inserting/replacing the battery

If the battery voltage is sufficient, the “batt” LED flashes briefly when you switch on the microphone. A new, unused battery has an operating time of approx. 300 hours.

When the battery voltage decreases, the “batt” LED lights up permanently. You should replace the battery. When the “batt” LED lights up permanently for the first time, the remaining operating time is approx. 50 hours.

Note: When not using the microphone for extended periods of time, remove the battery from the battery compartment!

To insert or replace the battery:

Push the catch of the battery compartment in the direction of the flashmount adapter and open the battery compartment.

Insert the AAA size battery as shown in the diagram on the right. Observe correct polarity when inserting the battery.

Close the battery compartment until the catch locks into place.

Puting the microphone into operation

Slide the microphone onto the video camera’s flashmount and lock the microphone by screwing down the knurled washer .

Insert the 3.5 mm stereo jack plug into the microphone input socket of the video camera.