Samsung PN4B40PD user manual Setting Up Anynet+, Scanning and Switching between Anynet+ Devices

❑Setting Up Anynet+

The following settings help set the Anynet+ functions.

TPress the TOOLS button to display Tools menu.

You can also set the Anynet+ by selecting Tools → Anynet+ (HDMI-CEC)

To use the Anynet+ Function, Anynet+ (HDMI-CEC) must be set to On

1.Press the MENU button. Press the ▲ or ▼ button to select Application, then press the ENTERE button.

2.Press the ▲ or ▼ button to select Anynet+ (HDMI-CEC), then press the ENTERE button.

3.Press the ▲ or ▼ to select Setup, then press the ENTERE button.

4.Press the ENTERE button to select Anynet+ (HDMI-CEC).

5.Press the ▲ or ▼ button to select On, then press the ENTERE button.

NThe Anynet+ (HDMI-CEC)function is enabled.

NIf you select Off, Anynet+ (HDMI-CEC)is disabled.

NWhen the Anynet+ (HDMI-CEC)function is disabled, all the Anynet+ related operations are deactivated.

Setting an Anynet+ Device to turn Off Automatically when the TV is Turned Off 1. Press the ▲ or ▼ button to select Auto Turn Off, then press the ENTERE button.

2. Press the ▲ or ▼ button to select Yes, then press the ENTERE button. N The Auto Turn Off function is enabled.

N If you select No, the Auto Turn Off function is canceled.

3. Press the EXIT button to exit.

NThe active source on the TV remote must be set to TV to use the Anynet+ function.

Application Anynet+ (HDMI-CEC) ▶

Device List

Setup

Move	Enter	Return
Setup
Anynet+ (HDMI - CEC)	: On	▶
Auto Turn Off	: Yes
Move	Enter	Return

NIf you set Auto Turn Off to Yes, connected external devices are also turned off when the TV is turned off. If an external device is still recording, it may or may not turn off.

❑Scanning and Switching between Anynet+ Devices

1.Press the TOOLS button. Press the ▲ or ▼ button to select Device List, then press the ENTERE button.

N Anynet+ devices connected to the TV are listed.

N If you cannot find a device you want, press the red button to scan for devices.

2.Press the ▲ or ▼ button to select to a particular device and press the ENTERE button. It is switched to the selected device.

N Only when you set Anynet+ (HDMI-CEC) to On in the Application menu, the Device List menu appears.

NSwitching to the selected devices may take up to 2 minutes. You cannot cancel the operation during the switching operation.

View TV
Device List
Recording	:	DVDR
DVDR MENU
DVDR INFO
Receiver	:	On
Setup
	Move	Enter	Return

NThe time required to scan for devices is determined by the number of connected devices. N When the device scan is complete, the number of devices found are not displayed.

N Although the TV automatically scans devices when it is turned on using the POWER button, devices connected when the TV is already on are not displayed in the device list. In this case, select the Searching Connections menu to search devices.

N If you have selected external input mode by pressing the SOURCE button, you cannot use the Anynet+ function. Make sure to switch to an Anynet+ device by using the TOOLS button.

TV Remote Control Buttons Available in Anynet+ Mode

Device Type	Operating Status		Available Buttons
	After switching to the device, when the	Numeric buttons ▲/▼/◄/►/ENTERE buttons
	menu of the corresponding device is
		Color buttons / EXIT button
Anynet+ Device	displayed on the screen.
	After switching to the device, while	(Backward search) /				(Forward search)
	playing a file	(Stop) /		(Play) /		(Pause)
Device with built-in Tuner	After switching to the device, when you	CH /	CH button
	are watching a TV program
Audio Device	When Receiver is activated	VOL	/ VOL		/	MUTE button

Continued...

English - 36