Configuring the Basic Settings in Initial Setup
When you turn the TV on for the first time, a sequence of screens and
✎✎Setup is available only when the Source is set to TV. See Changing the Input Source on page 12.
✎✎To return to the previous step in the Setup sequence, select Previous, and then press ENTERE button.
✎✎If you are not using a cable box or satellite box, make you sure have connected the TV to an antenna or cable connection before you turn on the TV. See page 4 for instructions.
✎✎If you want to configure a network connection, make sure you’ve connected the Samsung Wireless LAN Adaptor or a LAN cable to your TV. See pages 7 and 8 for instructions.
1 |
| Menu Language: | After you press the Power Button, the Start Screen appears. Press the | POWER |
| Select a menu | ENTEREbutton on your remote to continue. The Menu Language | ||
| P | |||
|
| language. | screen appears. | |
|
|
| Use the ▲/▼buttons to select a language, and then press ENTERE. | |
2 |
| Use Mode: Select the | The cursor jumps to Next. Press the ENTERE button. | |
| On the Use Mode screen, press ENTERE to select the Home Use |
| ||
| Use Mode. | mode. The cursor jumps to Next. Press the ENTERE button. The |
| |
|
|
| Network Settings screen appears. |
|
|
|
| ✎✎Store Demo mode is for retail environments only. If you select |
|
|
|
| Store Demo, some functions will not work, and the TV will reset |
|
|
|
| all functions to their factory default every 15 minutes. For more |
|
3 |
|
| information about Store Demo, go to the end of this section. |
|
| Network Settings: | 1. The TV automatically senses whether you connected the Wireless Adaptor or a LAN | ||
| Configure the network | cable to the TV. To continue configuring the network settings, press the ENTERE | ||
|
| settings. | button, and then go to Wireless Network or Wired Network below. |
|
|
|
| ✎✎ If you do not have a network, select Skip, press the ENTERE button, and | |
|
|
| then go to Auto Program (1) on the next page. |
|
|
|
| ✎✎ If you have a Network, you can also select Skip, and then configure your | |
|
|
| network later through Network Settings in the TV’s Menu. For more | |
|
|
| information, refer to “Setting the Wired Network / Setting the Wireless | |
3 |
|
| Network” in the |
|
a | Wireless Network | 1. The TV searches for and then displays all the wireless networks within range. When | ||
|
| done, it displays a list of the networks. Use the ▲/▼buttons to select a network, | ||
|
|
| and then press ENTERE. The cursor jumps to Next. Press ENTERE. The | |
|
|
| Security Key screen appears. |
|
|
|
| ✎✎ If you have a WPS(PBC) compatible router, select WPS(PBC) instead, press | |
|
|
| ENTERE, and then follow the directions on the screen. When done, go to | |
|
|
| Step 4. |
|
2.Enter your network security key or WPS PIN using the remote.
✎✎ Enter numbers by pressing the number buttons on your remote.
✎✎ Enter letters by selecting a letter using the ▲/▼/◄/► buttons, and then pressing ENTERE.
✎✎ To display capital letters (or redisplay small letters if capital letters are displayed), select Shift, and then press ENTERE.
✎✎ To display symbols and punctuation, select , and then press ENTERE. To redisplay letters, select Shift, and then press ENTERE.
3.When done, use the ▲/▼/◄/► buttons to select Next if you have entered a security key or WPS PIN if you have entered a WPS PIN, and then press
ENTERE.
4.The TV checks the wireless connection. If the connection is successful, the “Your wireless network and Internet connection are setup and ready to use.” message appears. The cursor jumps to Next. Press ENTERE, and then go to 4 Software Upgrade on the next page.
✎✎ If the connection fails, select Previous, repeat Step 1 and 2, carefully
English - 10