Samsung NC220P user manual Installing a Wall-mount Kit or Desktop Stand, Before Installation

2-5 Installing a Wall-mount Kit or Desktop Stand

Before Installation

Place a protective cloth or cushion on a flat surface. Next, place the product with the face down on top of the cloth or cushion.

Unfasten the screw from the back of the product.

Lift and detach the stand.

Installing a Wall-mount Kit or Desktop Stand

Attach the wall-mount kit or desktop stand here

Bracket (sold separately)

Align the grooves and tightly fasten the screws on the bracket on the product with the corresponding parts on the wall-mount kit or desktop stand you want to attach.

• Using a screw longer than the standard length can damage the internal components of the product.

•The length of screws required for a wall mount that does not comply with the VESA standards may vary depending on the specifications.

•Do not use screws that do not comply with the VESA standards. Do not attach the wall-mount kit or desktop stand using excessive force. The product may get damaged or fall and cause persona linjury. Samsung shall not be held liable for any damage or injury caused by using improper screws or attaching the wall-mount kit or desktop stand using excessive force.

•Samsung shall not be held liable for any product damage or personal injury caused by using a wallmount kit other than the one specified or from an attempt to install the wall-mount kit on your own.

•To mount the product on a wall, ensure you purchase a wall-mount kit that can be installed 10cm or farther away from the wall.

•Be sure to use a wall-mount kit that complies with the standards.

2-5 Installing the Product