Samsung NC220P user manual Product Operating Buttons, Power LED

3-7 Product Operating Buttons

Product Operating Buttons

Icon		Description
	Press this button to view the On Screen Display (OSD).
	This button is also used to exit the OSD or to return to a higher-level OSD menu
	* Key Lock
	This function locks the buttons on the front of the product to prevent the current settings from
	being changed by others.
MENU	Lock: Press and hold the MENU button for 5 seconds. The key lock mode will be enabled.
	Unlock: Press and hold the MENU button for 5 seconds when the key lock is enabled. The
	key lock mode will be disabled.
	When the key lock mode is enabled, all the buttons on the front of the product are
	disabled.
	Press the button at least 2sec to connect to the host PC in Client mode. In order to turn the
	host PC off, press the button more than 2 sec, being connected to the host PC.
▲/▼	Use these buttons to navigate the menu or to adjust a value in the OSD.
	When OSD is not on the screen, push the button to adjust volume.
	Use this button to select a function
	Press [	] to select the video signal from a connected device while the OSD is off.
	(When the [	] button is pressed to change the input mode, a message appears in the
	upper left of the screen displaying the current mode).
AUTO	In <Analog> mode, this button is used for auto adjustments. In <Client> mode, it is used to
	disconnect from the server.
	Press this button to turn the product on or off
	This LED is turned on when the product works normally.
(Power LED)	For more information on the power-saving function, refer to the power saving function
	in More Information. When not using the product for a long time, unplugging the power
	cord is recommended to minimize power consumption.

Using the product 3-7