Selecting an External Signal
You can use PIP to view a signal from an external source, such as a VCR.
Press the Menu button. Move the joystick up or
1 down to select the “PIP”, then press the joystick to enter.
Quick way to access the PIP source: Just press “Source” on the remote control.
Move the joystick up or down to select the
2 “Source”.
| PIP |
|
Select | On |
|
Source | Video |
|
Size | Large |
|
Swap |
|
|
Location |
|
|
Move | Select | Exit |
| PIP |
|
Select | On |
|
Source | Video |
|
Size | Large |
|
Swap |
|
|
Location |
|
|
Move | Select | Exit |
Move the joystick left or right to select an external
3 signal. You can choose “Video”,
The signal from these inputs will not appear if you have not connected any equipment to the PDP’s input jacks.
| PIP |
|
Select | On |
|
Source | Component | |
Size | Large |
|
Swap |
|
|
Location |
|
|
Move | Select | Exit |
4 Press the Menu button to exit.
45