Samsung TA550, TA350 Speaker Settings, Reset Sound OK / Cancel, Time, Selecting the Sound Mode

Basic Features

■■ SPDIF Output: SPDIF (Sony Philips Digital InterFace) is used to provide digital sound, reducing interference going to speakers and various digital devices such as a DVD player.

Audio Format: You can select the Digital Audio output (SPDIF) format.

✎✎ The available Digital Audio output (SPDIF) format may differ depending on the input source.

Audio Delay: Correct audio-video sync problems, when watching TV or video, and when listening to digital audio output using an external device such as an AV receiver (0ms ~ 250ms).

■■ Dolby Digital Comp (Line / RF): This function minimizes signal disparity between a dolby digital signal and a voice signal (i.e. MPEG Audio, HE-AAC, ATV Sound).

✎✎ Select Line to obtain dynamic sound, and RF to reduce the difference between loud and soft sounds at night time.

Line: Set the output level for signals greater or less than -31dB (reference) to either -20dB or -31dB.

RF: Set the output level for signals greater or less than -20dB (reference) to either -10dB or -20dB.

Speaker Settings

■■ Speaker Select (External Speaker / TV Speaker): A sound echo may occur due to a difference in decoding speed between the main speaker and the audio receiver. In this case, set the TV to External Speaker.

✎✎ When Speaker Select is set to External Speaker, the volume and MUTE buttons will not operate and the sound settings will be limited.

✎✎ When Speaker Select is set to External Speaker.

xx TV Speaker: Off, External Speaker: On ✎✎ When Speaker Select is set to TV Speaker. xx TV Speaker: On, External Speaker: On

✎✎ If there is no video signal, both speakers will be mute.

■■ Auto Volume (Off / Normal / Night): To equalize the volume level on each channel, set to Normal.

Night: This mode provides an improved sound experience compared to Normal mode, making almost no noise. It is useful at night.

Reset Sound (OK / Cancel)

Reset all sound settings to the factory defaults.

¦¦ Selecting the Sound Mode
When you set to Dual fg, the current	DUALf-g
sound mode is displayed on the screen.

	Audio	Dual f-g	Default
	Type
A2	Mono	Mono	Automatic
	Stereo	Stereo ↔ Mono	change
Stereo
	Dual	Dual f↔ Dual g	Dual f
	Mono	Mono	Automatic
NICAM	Stereo	Mono ↔ Stereo	change
Stereo	Dual	Mono ↔ Dual f	Dual f
		 Dual g

✎✎If the Stereo signal is weak and an automatic switching, occurs, then switch to the Mono.

✎✎Only activated in stereo sound signal.

✎✎Only available when the input Source is set to TV.

System Menu

¦¦ Setting the Time

OO MENUm→ System → ENTERE

Time

■■ Clock: Setting the clock is for using various timer features of the TV.

OO The current time will appear every time you press the INFO button.

✎✎ If you disconnect the power cord, you have to set the clock again.

Clock Mode (Auto / Manual)

xx Auto: Set the current time automatically using the time from a digital channel.

✎✎ The antenna must be connected in order to set the time automatically.

xx Manual: Set the current time manually.

✎✎ Depending on the broadcast station and signal, the auto time set up may not be correct. In this case, set the time manually.

English 30