Samsung TA350, TA550 user manual Connecting to an Antenna, Plug & Play Initial Setup, Or Home Use

Connections

Connecting to an Antenna

When the TV is initially powered on, basic settings proceed automatically. ✎✎Preset: Connecting the mains and antenna.

ANT OUT

Plug & Play (Initial Setup)

When the TV is initially powered on, a sequence of on-screen prompts will assist in configuring basic settings. Press the POWERPbutton. Plug & Play is available only when the Input Source is set to TV.

✎✎Before turning on the TV, make sure the antenna cable is connected. ✎✎To return to the previous step, press the Red button.

1	Selecting a language
2	Selecting Store Demo
	or Home Use

3	Selecting a country
4	Setting the
	Clock Mode
5	Selecting an antenna
6	Selecting a channel
7	Enjoy your TV.

Press the ▲ or ▼ button, then press the ENTEREbutton.		POWER
Select the desired OSD (On Screen Display) language.		P
Press the ◄ or ► button, then press the ENTEREbutton.
y	Select the Home Use mode. Store Demo Mode is for retail
	y environments.

yy To return the unit’s settings from Store Demo to Home Use (standard): Press the volume button on the TV. When you see the volume OSD, press and hold MENU for 5 sec.

yy Store Demo is only for shop display. If you select it, several functions are not able to use. Please select Home Use when you watch at home.

Press the uor dbutton, then press the ENTEREbutton. Select the appropriate country.

✎✎After selecting the country in the Country menu, some models may proceed with an additional option to setup the pin number. When you input the PIN number, “0-0-0-0” is not available.

Set the Clock Mode automatically or manually.

Press the ▲ or ▼ button, then press the ENTEREbutton. Select the Antenna source to memorise.

Press the ▲ or ▼ button, then press the ENTEREbutton.

Select the channel source to memorise. When setting the antenna source to Cable, a step appears allowing you to assign numerical values (channel frequencies) to the channels. For more information, refer to Channel → Auto Tuning (p. 24).

Press the ENTEREbutton.

If You Want to Reset This Feature...

Select System - Plug & Play (Initial Setup). Enter your 4 digit PIN number. The default PIN number is “0-0-0-0” (France: “1-1-1-1”). If you want to change the PIN number, use the Change PIN function.

You should do Plug & Play (MENU → System) again at home although you did in shop.

✎✎If you forget the PIN code, press the remote control buttons in the following sequence in Standby mode, which resets the PIN to “0-0-0-0”(France: “1-1-1-1”): POWER (off) → MUTE → 8 → 2 → 4 → POWER (on).

English 15