Samsung SP43L2HX, SP61L2HX, SP50L2HX manual Replacing the Lamp SP46L5HX/SP56L5HX

Page 6

Replacing the Lamp (SP46L5HX/SP56L5HX)

ENG

1Use a screwdriver to remove the screw.

2 Remove the Lamp cover.

3 Use a screwdriver to remove the screws securing the Lamp. There are 2 screws: one on the up and one on the down.

When the screws have been completely unfastened, they will still be connected to the body of the Lamp.

4Separate the Lamp from the engine by holding the handle and pulling it out.

5 To reinstall the Lamp, follow these steps in reverse order.

☛ A Projection TV lamp is a consumable item, and should be replaced from time to time for best projector operation. If the screen image becomes dark, or timer, lamp and Temp LEDs flicker off at the same time, you may have to replace the lamp. When changing the lamp, you should first verify the type/model, and then use only the correct lamp replacement. The code for lamp regulation and usage is marked on the label. If you remove the lamp, you can identify this replacement code. You should only replace the lamp with the one of the same regulation code.

◆ If you wish to buy a new lamp,please phone your Service Center or a nearby TV dealer, and tell them the model of your projection unit.

◆You can identify the lamp type on the left side of TV and the lamp cover.

◆ The TV will be damaged if you use a lamp that is different from the original supplied by the manufacturer. Be sure the replacement lamp is the same model.

◆ Please don't remove the lamp except when replacing with a new one.

◆ Please turn off TV power before changing a lamp and then unplug after waiting 1 minute.

◆ The cooling fan will help cool the lamp so you can safely remove it. The surface of the Lamp is very hot. Please wait for 30 minutes after turning off your projection TV to handle the lamp.

◆Please keep the old lamp away from flammable articles and children. Dispose of properly.

◆Don't allow dirt or dust to accumulate inside the lamp cover or on the Lamp.

◆A dirty cover or lamp can catch fire, explode and cause electric shock.

◆Please don't touch the front glass of a new lamp or the glass of the lamp container.

◆If a new lamp is improperly handled,the quality of the screen image can be affected and the expected life span of the lamp can be reduced.

◆Be sure to tighten the lamp cover on the TV after changing the lamp. Note that the TV will not function if the lamp cover is not securely attached. Please tighten the holding screw on the lamp cover after it has been attached to the TV.

6

Page 5 Page 7
Image 6
Page 5 Page 7
Contents Colour Television Safety Instructions Risk of Electric Shock Do not OpenContents Symbols Replacing the Lamp SP43L2HX/SP50L2HX/SP61L2HX Replacing the Lamp SP46L5HX/SP56L5HX Use a screwdriver to remove the screw Remove the Lamp coverLED Indicators SP43L2/50L2HX Channel Selection Power On/OffControl Panel of Your Television Using the Buttons on the Panel Connection Panel of Your Television Side of the TVRear of the TV Connecting to an Aerial or Cable Television Network Connecting a Satellite Receiver or DecoderConnecting Additional Speakers Inserting the Batteries in the Remote ControlInfrared Remote Control Switching Your Television On and Off Placing Your Television in Standby ModeMains lead is attached to the rear of your television Change channels and adjust the volume Becoming Familiar with the Remote ControlRemote control is used mainly to Display the on-screen menu systemPlug & Play Feature If you want to reset this feature Choosing Your LanguageStoring Channels Automatically SeeStoring ChannelsManually Auto NTSC3.58 NTSC4.43 PAL60BG DK I M Channel mode Skipping Unwanted Channels Skipping unwanted channelsSorting the Stored Channels Assigning Names to Channels Activating the Child Lock Activating the child lockSelecting a Channel by Information Changing the Picture Standard Dynamic Standard Movie Custom High Middle Low CustomAdjusting the Picture Settings Custom Contrast, Brightness, Sharpness, ColorColor Tone Cool2, Cool1, Normal, Warm1, Warm2 Adjusting the Picture Settings PC or DVI Mode Cool Nomal Warm CustomSetting the Picture PC Mode Using the Fine Tune Color System and Sound System settings are correctIf reception is weak, you can fine tune a channel manually Viewing the Channel Scan Picture Freezing the Current PictureUsing the LNA Low Noise Amplifier Feature Selecting the Picture Size Using the Digital NR Digital Noise Reduction Feature DNIeTM Digital Natural Image engine Setting the Blue Screen Selecting the Film ModeChanging the Sound Standard Standard Music Movie Speech CustomAdjusting the Sound Settings Adjusting the Volume AutomaticallyHall Pro Logic3D Sound OffAdjusting Your Dolby Preferences Setting the External Sound Selecting the Sound Mode depending on the model Setting the Melody Sound Setting the Sleep Timer Setting and Displaying the Current Time Switching the Television On and Off Automatically Absent Power OffViewing an External Signal Source AV1 AV2 AV3 AV4 Component1 Component2 PC DVIViewing the Picture In Picture PIP TV AV1 AV2 AV3 AV4 Component1 Component2 PC DVIPC or DVI Mode Easy functions of remote controlButtons Feature Listening to the Sound of the Sub Picture PC or DVI Mode Teletext Feature ContentsDisplaying the Teletext Information Press the TTX/MIX button againSelecting Display Options To display PressSelecting a Teletext Input Connecting to the External Input/OutputInput/Output Specification Audio L/R S-VideoConnecting to the DVD Input Connecting to the Audio OutputsRCA connectors are used for equipment with a DVD output Connecting to the Audio/Video Input Connecting to the S-Video InputRear of the TV Side of the TV Connecting to the DVI Input Connecting to the PC InputSetting up Your PC Software Windows only 1024 x 768 pixelsInput Mode PC/DVI Standard Dot x Line Vertical HorizontalPin Signal Pin ConfigurationsScart Connector PC Input Connector RS-232 Connector 15Pin 9PinProgramming the Remote Control for Other Components VCR Remote Control Codes MGACable Box Catv Remote Control Codes DVD Remote Control CodesTroubleshooting Before Contacting Service Personnel Technical Specifications SP43L2HX SP50L2HX SP61L2HX SP46L5HX SP56L5HXMemo Memo After Sales Service
Top Page Image Contents