1Preparations
1.3Installation
1.3.1 Attaching the Stand
Place a protective cloth or cushion on a flat surface. Next, place the product with the face down on top of the cloth or cushion.
Fasten the screw tightly (using a screwdriver or coin) into the bottom of the stand base.
- Caution
Do not hold the product upside down only by the stand.
Do not remove the fixing pin until you are finished attaching the stand.
After installing the stand, place the product upright.
Insert the stand base into the stand in the direction of the arrow.
You can remove the fixing pin and adjust the stand now.
Disassembly is the reverse order of assembly.
The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality.
1 Preparations 25