1Preparations
Icons | Description |
|
|
Use this button to control the brightness and contrast of the screen.
When OSD is not on the screen,push the button to adjust the Volume in Analog mode if a stereo cable is connected to the [IN] port.
When OSD is not on the screen,push the button to adjust the Volume in HDMI/DisplayPort mode.
Applicable to the models that have speakers only.
Confirm a menu selection.
Pressing the [
] button when the OSD menu is not displayed will change the input source (Analog/DVI/DisplayPort)(S22C650D/ S23C650D/S27C650D)(Analog/HDMI)(S22C650K/S23C650K)(Analog/ HDMI/DisplayPort)(S22C650P/S24C650PL/S27C650P). If you power
on the product or change the input source by pressing the [ 
] button, a message that shows the changed input source will appear at the top left corner of the screen.
Press the [AUTO] button to automatically adjust the screen settings.
Changing the resolution in Display Properties will activate the
AUTO
Auto Adjustment function.
This function is only available in Analog mode.
| Turn the screen on or off. |
|
|
| When a control button on the product is pressed, the Key Guide will be |
| displayed before the onscreen menu opens. (The guide shows the |
| function of the button pressed.) |
Key Guide | To access the onscreen menu when the guide is displayed, press the |
| corresponding button again. |
| The Key Guide may vary depending on the function or product model. |
| Refer to the actual product. |
1 Preparations 21