Sound Features
1Press the MENU button to display the menu.
2Press the ▲ or ▼ button to select Sound, then press the ENTER/OK button.
3Select the required option by pressing the ▲ or ▼ button, then press the ENTER/OK button.
Available options: Mode, Equalizer, SRS TS XT, Auto Volume, Internal Mute, Sound Select, Reset
4When you are satisfied with your setting, press the ENTER/OK button.
5Press the EXIT button to exit.
Mode: Standard/Music/Movie/Speech/Custom
You can select the type of special sound effect to be used when watching a given broadcast.
Equalizer: Balance/100Hz/300Hz/1kHz/3kHz/10kHz
The television has several settings which allow you to control the sound quality.
➢If you make any changes to these settings, the sound mode is automatically switched to Custom.
SRS TS XT: Off/On
TruSurround XT is a patented SRS technology that solves the problem of playing 5.1 multichannel content over two speakers. TruSurround delivers a compelling, virtual surround sound experience through any
➢TruSurround XT, SRS and 
Symbol are trademarks of SRS Labs,
Inc. TruSurround XT technology is incorporated under license from SRS Labs, Inc.
T V | Sound |
|
Mode | : Custom | |
Equalizer | : Off | |
SRS TS XT | | |
Auto Volume | : Off | |
Internal Mute | : Off | |
Sound Select | : Main | |
Reset |
|
|
Move | Enter | Return |
< If Game Mode is On >
T V |
| Sound |
|
Mode | : Custom | | |
Equalizer | : Off | | |
SRS TS XT | | ||
Auto Volume | : Off | | |
Internal Mute | : Off | | |
Sound Select | : Main | | |
Reset |
|
| |
| Move | Enter | Return |
T V |
| Equalizer |
|
R | + |
| + |
|
| ||
| 0 |
| 0 |
L | - |
| - |
|
|
| |
Balance 100Hz | 300Hz 1kHz 3kHz | 10kHz | |
| Move | Adjust | Return |
➢ You can select these options simply by pressing the SRS button on the remote control.
Auto Volume: Off/On Each broadcasting station has its own signal conditions, and
so it is not easy to adjust the volume every time the channel is changed. This feature lets you automatically adjust the volume
of the desired channel by lowering the sound output when the modulation signal is high or by raising the sound output when the modulation signal is low.
Internal Mute: Off/On
If you want to hear the sound through separate speakers, cancel the internal amplifier.
➢ The +, - and MUTE buttons do not operate when the Internal Mute is set to On.
Sound Select: Main/Sub
When the PIP feature is activated, you can listen to the sound of the sub (PIP) picture. − Main: Used to listen to the sound of the main picture.
− Sub: Used to listen to the sound of the sub picture.
Reset
If Game Mode is On, the Reset Sound function is activated. Selecting the Reset function after setting the equalizer resets the equalizer setting to the factory defaults.
TRADEMARK & LABEL LICENSE NOTICE
Manufactured under license from Dolby Laboratories.
“Dolby” and the
English - 22