Samsung PS-50C77HD, PS-50E97HD, PS-50C67HD manual Setting up Your PC Software Based on Windows XP

Page 30

Setting up Your PC Software (Based on Windows XP)

The Windows display-settings for a typical computer are shown below. But the actual screens on your PC will probably be different, depending upon your particular version of Windows and your particular video card. But even if your actual screens look different, the same, basic set-up information will apply in almost all cases. (If not, contact your computer manufacturer or Samsung Dealer.)

1Right click the mouse on the Windows Desktop, then click on Properties.

The Display Properties will be displayed.

2Click on Settings tab, then set the Display Mode with reference to the Display Modes Table. You do not need to change the Colours settings.

3Click on Advanced. A new settings dialog box will be displayed.

4Click on the Monitor tab, then set the Screen refresh rate with reference to the Display Modes Table. Set the Vertical Frequency and Horizontal Frequency individually if you can do so instead of setting the Screen refresh rate.

5Click on OK to close the window, then Click on OK button to the Display Properties window. Automatic re-booting may commence at this moment.

English - 30

Image 30

Contents Kontakt do Samsung WORLD-WIDE Contact Samsung WORLD-WIDEKapcsolatfelvétel Samsung WORLD-WIDE Επικοινωνήστε με τη Samsung ΣΕ ΟΛΟ ΤΟΝ ΚοσμοUser Instructions Contents Checking Parts Ferrite Core Power CordUsing the Stand-BasePS-42E97HD/PS-50E97HD Sold SeparatelyControl Panel Rear Panel Input/Output SpecificationConnection Panel EXT 1, EXTDVI audio outputs for external devices 75Ω Coaxial connector for Aerial/Cable NetworkCommon Interface Slot Supported modes for Hdmi and ComponentNext channel Viewing the Remote ControlDTV menu display Selects the Hdmi mode directly Teletext FunctionsSwitching Your Television On and Off Installing Batteries in the Remote ControlMain lead is attached to the rear of the television Plug & Play Feature Viewing the MenusPress the Exit button to exit from the menu Press the ENTER/OK button to start search the channels Viewing an External Signal Sources If you want to reset this feature …Storing Channels Automatically Not available in DTV or external input modeEditing Device Names You can give a name to the external sourceStoring Channels Manually Adding / Locking Channels Sorting the Stored Channels Assigning Names to ChannelsFine Tuning Channel Reception Changing the Picture StandardCustomizing the Picture Settings Colour Space Configuring Detailed Settings on the PictureYou can set detailed picture settings Screen depthSelecting the Screen Mode Selecting the Picture SizeDigital NR / Active Colour / DNIe Freezing the Current PictureSound Features Selecting the Sound Mode depending on the model NicamTime Features  Melody Off/Low/Medium/High  Language Blue Screen On/Off  Hdmi Black Level Normal/LowUsing the Game Mode Selecting game menuEntering the menu Wall- mount adjustment Sold separatelyUsing the remote Control Buttons OperationsViewing the Picture in Picture PIP Screen Burn Protection GrayTV/Ext/Component Setting up Your PC Software Based on Windows XP Input Mode PC KHz Auto Adjustment Setting the PCImage Reset  Image ResetSetting the Home Theatre PC Settings in PC ModeStandard or Movie as in PC Mode Previewing the DTV Menu System Displaying Programme Information Language Audio LanguageOperating the DTV Menu  Renumber ENTER/OK button Add  PreviewChannel List Channels and all channelsDefault Guide You can preset the default guide styleThis menu consists of 4 sub-menus All Channels and Favorite ChannelsLanguage Audio Language / Subtitle Language / Teletext Language If you change the language setting, the Audio This menu consists of 6 sub-menusThen press the ENTER/OK button This menu consists of 8 sub-menus Menu TransparencyParental Lock Are displayed Subtitle button on the remote controlFeature is enabled − Subtitle On / Off Standby Mode Upgrade On / Off − Software Version / Firmware Version − Signal Information Manual Upgrade SystemDealer or by phone  Installing the CI Card− Common Interface Arrow until it fitsIndex Teletext Feature depending on the modelCancel SizeEnglish Wall Mount Kit Specifications Vesa InchStandard Screw Quantity Setting Up Your Remote Control Setting Up the Remote to Operate Your VCRSetting Up the Remote to Operate Your Cable Box Setting Up the Remote to Operate Your DVD Setting Up the Remote to Operate Your Set Top BoxRemote Control Codes VCRSamsung SET-TOP BOX Samsung DVD How to assemble the Stand-Base depending on the model TroubleshootingSpecifications This page is intentionally Left blank This page is intentionally Left blank This page is intentionally Left blank Correct Disposal of This Product