Using the Photo (JPEG) List
Move Enter 
Return
œœ 1/10 Page √√
219x171
6 KBytes May 05,2006 3/130
Move | Enter | Photo Menu | Return |
Slide Show
Rotate
Zoom
Copy
Delete
List
Exit
Rotating
1After switching the mode to WISELINK, select a memory device that you have installed. (Refer to page 29)
2Press the œ or √ button to select Photo, then press the ENTER ( 
) button. JPEG files and existing folders are displayed.
3Press the …/†/œ/√ buttons to select a file, then press the ENTER ( 
) button. Pressing the button over a photo icon shows the currently selected photo in full screen.
4Press the INFO (
) button to display the option (Slide Show, Rotate,
Zoom, Copy, Delete, Print, List).
Press the … or † button to select Rotate, then press the ENTER ( 
) button.
Each time the ENTER ( 
) button is pressed, the photo rotates repeatedly. (90° 180° 270° 0°)
➢Rotating directly from 90 degrees to 270 degrees is not allowed.
➢When rotating a photo, the edge of the photo may not be displayed on the screen.
To exit WISELINK mode, press the WISELINK button on the remote control.
➢The rotated file is not saved.
The Rotating function information icon (Displayed at the top left of the screen).
Icon | Current OSD | Function |
Rotating (90°) To rotate a photo by 90 degrees
Rotating (180°) To rotate a photo by 180 degrees
Rotating (270°) To rotate a photo by 270 degrees
To rotate a photo by original
➢Press the WISELINK button on the remote control to turn on the WISELINK mode.
continued...
English - 34