Samsung PS-42V4S Using the Fine Tune, If reception is weak, you can fine tune a channel manually

Page 29

Using the Fine Tune

If reception is weak, you can fine tune a channel manually.

1Press the MENU button.

Result: The main menu is displayed.

2Press the † or … button to select Channel.

Result: The options available in the Channel group are displayed.

3Press the ENTER ( ) button.

4Press the † or … button to select Fine tune. Press the ENTER ( ) button.

Result: The horizontal bar is displayed. Move the horizontal bar’s cursor left or right by pressing the œ or √ button to reach the required setting.

5Press the œ or √ button until the picture and sound are both clear and sharp.

➣If you are unable to fine tune a channel, check that the

Colour System and Sound System settings are correct.

➣Fine tune Store will change the colour of the Channel OSD(On Screen Display) from White to Red.

➣To reset the fine tuning to “0”, press the † button to select “Reset”, then press the ENTER button.

ENG

TV	Channel
Country	: Austria	√
Auto Store		√
Manual Store		√
Edit		√
Fine Tune		√
Ch. Scan		√
Move	Enter	Return

Fine Tune

P1

0

Reset Return

Move

œ √ Adjust

Store

Fine Tune

P1

3

Reset Return

Move

œ √ Adjust

Store

Fine Tune

P 1 is fine tuned

3

Reset Return

Move

œ √ Adjust

Store

P1 C11

29

Image 29

Contents PDP-TELEVISION Screen Image retention Video Cable Sold SeparatelyContents Symbols Depending on your model Actual configuration on your PDP may be differentFor further details about connection, refer to pages 50~54 Rear PanelInfrared Remote Control Stand base will be sold separately depending on model Inserting the Batteries in the Remote ControlInstalling the Display on the Wall Attachment Panel Connecting External Devices to the PDP Connecting Speakers Ferrite Cores Connecting a Satellite Receiver or Decoder Connecting to an Aerial or Cable Television NetworkUsing a Coaxial cable Rear of the PDPPlacing in Standby Mode Switching On and OffTo switch your PDP off, press the I / button again Mains lead is attached to the rear of your PDPRemote control is used mainly to Becoming Familiar with the Remote ControlChange channels and adjust the volume Display the on-screen menu systemTo start the search, press the Enter button Plug & Play FeatureChoosing Your Language If you want to reset this featureSee Storing Channels AutomaticallyYou wish to identify Storing ChannelsManuallyAuto PAL Secam or Auto NT3.58 NT4.43 PAL60Channel mode Skipping unwanted channels Skipping Unwanted ChannelsSorting the Stored Channels Assigning Names to Channels Activating the child lock Activating the Child LockDynamic Standard Movie Custom High Middle Low Custom Displaying InformationChanging the Picture Standard Custom Options available in DVI Mode Contrast Adjusting the Picture SettingsResult The Custom menu is displayed Brightness, SharpnessPress the Menu button to confirm your choice Adjusting the Picture Settings DVI ModeIf reception is weak, you can fine tune a channel manually Using the Fine TuneColour System and Sound System settings are correct Freezing the Current Picture Viewing the Channel Scan PictureSelecting the Picture Size Positioning and Sizing the screen using ZoomDNIeTM Digital Natural Image engine Selecting the Film ModeMelody sounds when the television is powered on or off Setting the Blue ScreenSetting the Melody Sound TV Ext.1 Ext.2 AV S-Video Component DVI Table of PIP SettingsViewing the Picture In Picture PIP Tvpip Result The options available are listed Using the Digital NR Digital Noise Reduction FeatureUsing the LNA Low Noise Amplifier Feature Standard Music Movie Speech Custom Changing the Sound StandardAdjusting the Volume Automatically Adjusting the Sound SettingsStereo Setting the TruSurround XTSelecting the Internal Mute Forced mono Selecting the Sound Mode depending on the modelSetting the Sleep Timer Setting and Displaying the Current Time Absent Power Off Switching the Television On and Off AutomaticallySatellite STB, AV Receiver, DVD Receiver, Game Viewing an External Signal SourceExt.1 Ext.2 AV S-Video Component DVI Redirecting an Input to the External Output Contents Teletext FeaturePress the TTX/MIX button again Displaying the Teletext InformationTo display Press Selecting Display OptionsSelecting a Teletext Rear of the TV Connecting to the External DevicesInput/Output Specification Connecting to the S-Video Input Connecting to the DVI Input Connecting to the Component Input Connecting the Home Theater System Connecting and Using the Home Theater SystemDVI Input Connector 24Pin Scart Connector Ext.1,Ext.2Check the picture contrast and brightness settings Power buttonCheck the volume Normal picture but no sound Check the volumeMemo After Sales Service