Switching On and Off
ENG
The mains lead is attached to the rear of your PDP.
1Plug the mains lead into an appropriate socket.
Result: The Standby indicator on the front of the PDP lights up.
➢The main voltage is indicated on the rear of the PDP and the frequency is 50 or 60Hz.
2Press the “I / ” button on the front of the PDP (or POWER ( ) button on the remote control) to switch the PDP on.
Front of the PDP
Result: The programme that you were watching last is re- selected automatically.
| ➣ If you have not yet stored any channels, No clear picture |
| |
| appears. Refer to “Storing Channels Automatically” on page | TV | |
| 20 or “Storing Channels Manually” on page 22. | ||
3 | To switch your PDP off, press the “I / | ” button again. |
|
Placing in Standby Mode
Your PDP can be placed in Standby mode, in order to reduce the
Power consumption.
The Standby mode can be useful when you wish to interrupt |
| |||
viewing temporarily (during a meal, for example). | TV | |||
|
|
|
| |
1 | Press the POWER ( | ) button on the remote control. |
| |
| Result: | The screen is turned off and the Standby indicator on |
| |
|
| the front of the PDP lights. |
|
2To switch the PDP back on, simply press the POWER ( ) button again or a numeric button.
➣ You can also switch on by pressing the P or button.
15