Samsung PS50Q91H, PS50Q92H, PS42Q92H, PS42Q91H manual Setting Up Anynet+

Setting Up Anynet+

The following settings are to use Anynet+ functions. Using the Anynet+ Function

1Press the Anynet+ button.

Press the ▲ or ▼ button to select Setup, then press the ENTER button.

2Press the ENTER button to select Anynet+ (HDMI-CEC), then press the ENTER button.

3Press the ▲ or ▼ button to select On, then press the ENTER button.

➢The Anynet+ (HDMI-CEC) function is enabled.

➢If you select Off, Anynet+ (HDMI-CEC) is disabled.

➢When the Anynet+ (HDMI-CEC) function is disabled, all the Anynet+ related operations are deactivated.

TV	P 1
	View TV
	Select Device		
	Record		
	Menu on Device		
	Device Operation		
	Receiver	:Off	
	Setup		
	Move	Enter
	Exit
		Setup
Anynet+ (HDMI-CEC)			: OffOff
Auto Turn Off			: OffOn
Searching Connections
	Move		Enter	Return

Turning an Anynet+ Device Off Automatically when the TV is Turned Off
2 Press the ▲ or ▼ button to select Auto Turn Off, then press				Setup
3	the ENTER button.	Anynet+ (HDMI-CEC)			: On
	Press the ▲ or ▼ button to select On, then press the ENTER	Auto Turn Off				: Off
	button.
						Off
	➢ The Auto turn off function is enabled.	Searching Connections				On
	➢ If you select Off, the Auto turn off function is canceled.
	Press the EXIT button to exit.		Move		Enter	Return
➢ The Select Device setting of the TV remote control is to be set
	to TV to use the Anynet+ function.
➢ If you set Auto Turn Off to On, connected external devices are also turned off when the TV is turned
	off. However, if the device is recording, it may not be turned off.
Scanning and Switching between Anynet+ Devices
1	Press the Anynet+ button.
2	Press the ▲ or ▼ button to select Select Device, then press	TV	P 1
	the ENTER button.		View TV			DVDR1
3 Press the ▲ or ▼ button to select to a particular device and			Select Device			DVDR2
	press the ENTER button.		Record			DVD1
4	It is switched to the selected device.		Menu on Device			DVD2
	If you cannot find a device you want, press the ▲ or ▼ button		Device Operation		
	to select Searching Connections, then press the ENTER		Receiver	:Off	
	button.		Setup		
	The meassage Configuring Anynet+ connection... is		Move	Enter
	displayed. When searching devices completes, the connected		Return
	devices are listed in the Anynet+ menu.			Setup
➢ Switching to the selected devices may take up to 2 minutes.
	You cannot cancel the operation during the switching	Anynet+ (HDMI-CEC)			:	On	
	operation.	Auto Turn Off			:	On	
➢ The time required to scan for devices is determined by the
	number of connected devices.	Searching Connections					
➢ When the device scan is complete, the number of found
	devices is not displayed.		Move		Enter	Return
➢ Although the TV automatically scans devices when it is turned
	on using the POWER button, devices connected when the TV is on or under a specific circumstance
	are not displayed in the device list. Therefore select Searching Connections menu to search

devices.

➢ If you have selected external input mode by pressing the SOURCE button, you cannot use the

Anynet+ function. Make sure to switch to an Anynet+ device by using the Anynet+ button.

English - 36Continued...