Samsung PS-63P76FD, PS-50P96FD manual Setting Up Anynet+

Setting Up Anynet+

The following settings are to use Anynet+ functions. Using the Anynet+ Function

1Press the Anynet+ button.

Press the ▲ or ▼ button to select Setup, then press the ENTER/OK button.

2Press the ENTER/OK button to select Anynet+ (HDMI-CEC), then press the ENTER/OK button.

TV	P 1
	View TV
	Select Device		
	Record		
	Menu on Device		
	Device Operation		
	Receiver	:Off	
	Setup		
	Move	Enter
	Return

3Press the ▲ or ▼ button to select On, then press the ENTER/ OK button.

➢The Anynet+ (HDMI-CEC) function is enabled.

➢If you select Off, Anynet+ (HDMI-CEC) is disabled.

➢When the Anynet+ (HDMI-CEC) function is disabled, all the Anynet+ related operations are deactivated.

Setup
Anynet+ (HDMI-CEC)	: OffOff
Auto Turn Off	: OffOn
Searching Connections
Move	Enter	Return

Turning an Anynet+ Device Off Automatically when the TV is Turned Off
2 Press the ▲ or ▼ button to select Auto Turn Off, then press			Setup
3	the ENTER/OK button.	Anynet+ (HDMI-CEC)		: On
	Press the ▲ or ▼ button to select On, then press the ENTER/
	OK button.	Auto Turn Off			: Off
	➢ The Auto Turn Off function is enabled.				Off
		Searching Connections			On
	➢ If you select Off, the Auto Turn Off function is canceled.
	Press the EXIT button to exit.
➢ The Select Device setting of the TV remote control is to be set		Move		Enter	Return
	to TV to use the Anynet+ function.
➢ If you set Auto Turn Off to On, connected external devices are also turned off when the TV is turned
	off. However, if the device is recording, it may not be turned off.
Scanning and Switching between Anynet+ Devices
1	Press the Anynet+ button.
2	Press the ▲ or ▼ button to select Select Device, then press	TV	P 1
	the ENTER/OK button.	View TV			DVDR1
3 Press the ▲ or ▼ button to select to a particular device and		Select Device			DVDR2
	press the ENTER/OK button.	Record			DVD1
4	It is switched to the selected device.	Menu on Device			DVD2
	If you cannot find a device you want, press the ▲ or ▼ button	Device Operation		
	to select Searching Connections, then press the ENTER/OK	Receiver :Off		
	button.	Setup		
	The meassage Configuring Anynet+ connection... is	Move	Enter
	displayed. When searching devices completes, the connected	Return
	devices are listed in the Anynet+ menu.		Setup
➢ Switching to the selected devices may take up to 2 minutes.
	You cannot cancel the operation during the switching	Anynet+	(HDMI-CEC)	:	On	
	operation.	Auto Turn Off		:	On	
➢ The time required to scan for devices is determined by the
	number of connected devices.	Searching Connections				
➢ When the device scan is complete, the number of found
	devices is not displayed.	Move		Enter	Return
➢ Although the TV automatically scans devices when it is turned
	on using the POWER button, devices connected when the TV is on or under a specific circumstance
	are not displayed in the device list. Therefore select Searching	Connections menu to search
	devices.

➢ If you have selected external input mode by pressing the SOURCE button, you cannot use the

Anynet+ function. Make sure to switch to an Anynet+ device by using the Anynet+ button.

Continued...

English - 47