Samsung PS-63P76FD, PS-50P96FD manual United Kingdom

Page 61

Wiring the Mains Power Supply Plug (UK Only)

IMPORTANT NOTICE

The mains lead on this equipment is supplied with a moulded plug incorporating a fuse. The value of the fuse is indicated on the pin face of the plug and, if it requires replacing, a fuse approved to BSI1362 of the same rating must be used. Never use the plug with the fuse cover omitted if the cover is detachable. If a replacement fuse cover is required, it must be of the same colour as the pin face of the plug. Replacement covers are available from your dealer.

If the fitted plug is not suitable for the power points in your house or the cable is not long enough to reach a power point, you should obtain a suitable safety approved extension lead or consult your dealer for assistance.

However, if there is no alternative but to cut off the plug, remove the fuse and then safely dispose of the plug. Do NOT connect the plug to a mains socket as there is a risk of shock hazard from the bared flexible cord.

IMPORTANT

The wires in the mains lead are coloured in accordance with the following code:

BLUE - NEUTRAL BROWN - LIVE

As these colours may not correspond to the coloured markings identifying the terminals in your plug, proceed as follows: The wire coloured BLUE must be connected to the terminal marked with the letter N or coloured BLUE or BLACK. The wire coloured BROWN must be connected to the terminal marked with the letter L or coloured BROWN or RED.

WARNING:

DO NOT CONNECT EITHER WIRE TO THE EARTH TERMINAL, WHICH IS MARKED WITH THE LETTER E OR BY THE EARTH SYMBOL , OR COLOURED GREEN OR GREEN AND YELLOW.

Warranty Card

UNITED KINGDOM

This Samsung product is warranted for a period of twelve (12) months from the original date of purchase, against defective materials and workmanship. In the event that warranty service is required, you should return the product to the retailer from whom it was purchased. However, Samsung Authorised Dealers and Authorised Service Centres in other EC Countries will comply with the warranty on the terms issued to purchasers in the country concerned. In case of difficulty, details of our Authorised Service Centres are available from:

Samsung Electronics U.K. Ltd.

Customer Care Centre

PO Box 17243

Edinburgh, EH11 4YB

United Kingdom

Tel: 0 0 SAMSUNG (7267864)(UK & Northern Ireland)

Tel: 0818 717 100 (Republic of Ireland Only)

Fax: +44 (0)870 7221127

Web : www.samsung.com/uk

WARRANTY CONDITIONS

1.The warranty is only valid if, when warranty service is required, the warranty card is fully and properly completed and is presented with the original invoice or sales slip or confirmation, and the serial number on the product has not been defaced.

2.Samsung’s obligations are limited to the repair or, at its discretion, replacement of the product or the defective part.

3.Warranty repairs must be carried out by Authorised Samsung Dealers or Authorised Service Centres.

No re-imbursement will be made for repairs carried out by non Samsung Dealers and, any such repair work and damage to the products caused by such repair work will not be covered by this warranty.

4.This product is not considered to be defective in materials nor workmanship by reason that it requires adaptation in order to conform to national or local technical or safety standards in force in any Country other than the one for which the product was originally designed and manufactured.

Image 61
Contents PDP-TELEVISION User Instructions Contents Checking Parts Using the Stand-BaseSold Separately Control Panel Connection Panel Headphones jackSide Panel Video or Video / Audio L/REXT 1, EXT Input/Output SpecificationCommon Interface Slot Supported modes for Hdmi and ComponentDTV menu display a Records for Live Broadcasting Viewing the Remote ControlNext channel Menu Use to see information onInstalling Batteries in the Remote Control Switching Your Television On and OffMain lead is attached to the rear of the television Viewing the Menus Plug & Play FeaturePress the Exit button to exit from the menu Auto Store 40 MHz If you want to reset this feature … Viewing External Signal SourcesEditing Device Names Not available in DTV or external input modeStoring Channels Automatically You can give a name to the external sourceStoring Channels Manually Adding / Locking Channels Assigning Names to Channels Sorting the Stored ChannelsWeak signal Fine Tuning Channel ReceptionPreamplifier boosts the incoming signal LNA Low Noise AmplifierChanging the Picture Standard Customizing the Picture SettingsYou can set detailed picture settings Configuring Detailed Settings on the PictureSettings can be selected Picture mode is in Standard modePositioning and Sizing the screen using Zoom Selecting the Screen ModeSelecting the Picture Size Just ScanFreezing the Current Picture Digital NR / Active Colour / DNIe / Movie PlusSound Features Nicam Selecting the Sound Mode depending on the modelTime Features Button Press the Exit button to exit Saving, Hdmi Black Level Language Will be used for displaying menus and indicationsSelecting game menu Using the Game ModeUsing the remote Control Buttons Wall- mount adjustment Sold separately PS-50P96FDEntering the menu OperationsFrom any connected devices Viewing the Picture in Picture PIPAvailable options PIPOn/Off, Source, Size, Position ProgrammeGray Screen Burn ProtectionTV/Ext/AV/S-Video Setting up Your PC Software Based on Windows XP HDMI/DVI Input Display ModesImage Reset Setting the PC Auto Adjustment  Image ResetSettings in PC Mode Setting the Home Theatre PCStandard or Movie as in PC Mode Previewing the DTV Menu System Language Displaying Programme InformationAutomatically using channel You can specify the frequency KHz usingManual Store You can specify the channel for a fast channel searchEdit Favourite Channels If The Favourite Channels settings have beenTo display all currently stored channels Favourites listChannels and all channels Channel ListYou can preset the default guide style Default GuideThis menu consists of 4 sub-menus All Channels and Favourite ChannelsAudio Language / Subtitle Language / Teletext Language This menu consists of 6 sub-menus  If you change the language setting, the AudioUser selects a channel Then press the ENTER/OK buttonThis menu consists of 8 sub-menus SetupMenu Transparency Parental LockFeature is enabled Subtitle button on the remote controlYou can select the time zone where you are located Are displayed Manual Upgrade − Software Version / Firmware Version − Signal Information Standby Mode upgrade On / Off System Application Info − Common Interface  Installing the CI Card CI Menu Connecting Anynet+ Devices What is Anynet+?To connect to Home Theatre Setting Up Anynet+ Recording Listening through a Receiver Cancel Teletext Feature depending on the modelExit from the teletext display depending on the model IndexEnglish Inch Wall Mount Kit Specifications VesaStandard Screw Quantity Setting Up the Remote to Operate Your VCR Setting Up Your Remote ControlSetting Up the Remote to Operate Your Cable Box Setting Up the Remote to Operate Your Set Top Box Setting Up the Remote to Operate Your DVDVCR Remote Control CodesSamsung SET-TOP BOX Samsung DVD Troubleshooting How to assemble the Stand-Base depending on the modelPC Resolution SpecificationsDimension WxHxD WeightRisk of Electric Shock do not Open United Kingdom This page is intentionally Left blank Correct Disposal of This Product Country Contact Samsung WorldwideWeb Site 0818 717 Samsung BN68-01094R-00