Samsung PS42P2S manual Displaying the Setting Values of Various Displays, Troubleshooting

Page 53

Displaying the Setting Values of Various Displays

ENG

◆No selection: It displays the factory default value.

◆Select one display: It receives and displays the setting value for the selected one display.

◆When you have already selected one display (ID1) and add to select another display (ID3):

The program, which have displayed the settings value of ID1, receives and displays the value of ID3.

◆Select all sets at once by using “Select All”: It returns to the factory default value.

Troubleshooting

ŒThe display you want to control doesn’t appear on the power control info grid.

-Check RS-232C MUST be connected to the COM1 port.

-Check the displays which have the same Set ID among the connected displays. If so, the displays are not appeared properly in the program.

-Check the set ID number is within 0 to 10. (You can adjust the set ID number on the menus of your display.)

-The display Set ID should be set to between 0 and 10. If not, the value would be out of the range in MDC system so that the display cannot be controlled. It is ensured that this program can operate the maximum of 4 displays at the same time. It may operate 4 to 10 displays simultaneously but not guarantee proper operation in this model.

´The display you want to control doesn’t appear on the other control info grids.

-Check the display is powered ON. (You can check on the power control info grid.)

-Check the input source of the display you want to control can be controlled.

ˇThe dialogue box appears repeatedly.

-Check the display you want to control is marked.

¨Both On Timer and Off Timer functions have been set, but a different time is applied.

-Apply the current time to set the time of each display equal.

ˆThe remote control may not function properly if you disconnect the RS-232C cable or exit from the programs in an irregular manner even with the remote control function is OFF.

- Rerun program and turn the remote control function ON to restore normal functions.

ØThis program might malfunction because of a communicational control between PC and Display or electromagnetic waves from peripherals.

∏For further information, contact an authorized Samsung service center.

53

Image 53

Contents Plasma Display User Instructions Safety InstructionsMain voltage is indicated on Checking PartsContents Contents Front Panel Your New Plasma Display PanelVideo Input Rear PanelPower Remote Control ButtonsInstallation Notes Inserting the Batteries in the Remote ControlInstalling the Display on the Wall Attachment Panel Angle control holes Remove four large screws from the rear side of the display Ferrite Cores Before Connecting the Display to External EquipmentSeparating the Display from the Wall Attachment Panel Connecting Stand and Speakers Connecting SpeakersConnecting PDP and Speakers Videotape Playback Connecting Your VCR or Cable BoxRear panel Connecting a DVD Playar or Set-top BoxViewing the Menus and Displays Switching On and OffChoosing Your Language Move the joystick Using the Various Setup MenusPicture menu Using Automatic Picture SettingsFreezing the Current Picture To adjust Move the joystickCustomizing the Picture Wide, Panorama, 149, 43, Zoom1, Zoom2 Stretch Changing the Picture formatPanorama 149Adjusting the Volume Customizing the Sound Using Automatic Sound SettingsSwitching On and Off Automatically Setting the Current TimeIf the sleep timer is Screen displays Setting the Sleep TimerDouble Large Small Viewing the Picture in Picture PIPAV1V AV1S Comp.1 Swap Features DescriptionLocate SizeAV1Video AV1S-Video Component1 Displaying InformationsViewing Pictures From External Sources Part Contents Teletext FeatureDisplaying the Teletext Information To display Press Adjusting the Teletext ContrastSelecting a Teletext Viewing the PC screen Connecting a PCPin Configuration Preset Signals Setting up Your Display Plug and PlayFrequency Horizontal frequency Resolution Source VideoColor Setting up Your PC Software Windows onlyStandard Dot x Line Vertical Horizontal PC Input ModeSxga Controlling the Screen Color Changing the Screen Position Adjusting the Screen QualityPhase option Changing the Screen Size Initializing the Frequency, Phase, and PositionPower Saver PC Mode Only Enjoying the PIP Feature in PC modeMultiple Display Control MDC Installing the Multiple Display Control MDC Setting the Multiple Display Control MDCInstalling the Multiple Display Control MDC Viewing the Main Screen Changing the Port Confirming the PortPower On/Off Controlling the Power´ Volume Control Mute On/OffControlling the Input Source Controlling the Aspect Ratio PC Controlling the Aspect Ratio Video/S-Video/Component1,2Controlling the Time Setting the Picture RGB PC Setting the Picture Video/S-Video/Component1,2Setting the Image Lock Setting the AudioTroubleshooting Displaying the Setting Values of Various DisplaysIdentifying Problems Care and MaintenanceMonitor mode Problem Possible SolutionAfter Sales Service