Samsung PS50A450 user manual Setting Up Anynet+, Scanning and Switching between Anynet+ Devices

4

Press the ▲ or ▼ button to select Auto Turn Off, then press

Setup

5

the ENTER button.

Anynet+ (HDMI-CEC)

: On

Press the ▲ or ▼ button to select Yes, then press the

ENTER button.

Auto Turn Off

: Off

No

➢ The Auto turn off function is enabled.

Searching Connections

➢ If you select No, the Auto turn off function is canceled.

Yes

Press the EXIT button to exit.

➢ The Select Device setting of the TV remote control is to be set

Move

Enter

Return

to TV to use the Anynet+ function.

Press the ▲ or ▼ button to select Input, then press the

TV

P 1

ENTER button.

View TV

DVDR1

2

Press the ▲ or ▼ button to select Anynet+ (HDMI-CEC),

DVDR2

Select Device



then press the ENTER button.

Record



DVD1

3

DVD2

Press the ▲ or ▼ button to select Select Device, then press

Menu on Device



4

the ENTER button.

Device Operation



Press the ▲ or ▼ button to select to a particular device and

Receiver

:Off



5

press the ENTER button. It is switched to the selected device.

Setup



If you cannot find a device you want, press the ▲ or ▼ button

Move

Enter

to select Searching Connections, then press the ENTER

Return

button.

Setup

The meassage Configuring Anynet+ connection is

displayed. When searching devices completes, the connected

Anynet+ (HDMI-CEC)

:

On



devices are listed in the Anynet+ menu.

Auto Turn Off

:

Yes



➢ Switching to the selected devices may take up to 2 minutes.

Searching Connections



You cannot cancel the operation during the switching

operation.

Move

Enter

Return

➢ The time required to scan for devices is determined by the

number of connected devices.

➢ When the device scan is complete, the number of found devices is not displayed.

➢ Although the TV automatically scans devices when it is turned on using the

POWER button, devices

connected when the TV is on or under a specific circumstance are not displayed in the device list.