Samsung PS50A450 Fine Tuning Channel Reception, Changing the Picture Standard, Easy Setting

If the reception is clear, you do not have to fine tune the channel, as this is done automatically during the search and store operation.

If the signal is weak or distorted, you may have to fine tune the channel manually.

1Press the MENU button to display the menu.

2Press the ▲ or ▼ button to select Channel, then press the ENTER button.

3Press the ▲ or ▼ button to select Fine Tune, then press the ENTER button.

4To obtain a sharp, and clear picture and good sound quality, press the ◄ or ► button until you reach the optimal setting.

Press the ENTER button.

➢Press the INFO button. Fine Tune Store will change the colour of the Channel OSD (On Screen Display) from white to red and add the “ * ” mark.

➢To reset the fine tuning to 0, select Reset by pressing the

▲ or ▼ button. Press the ENTER button.

5Press the EXIT button to exit.

Changing the Picture Standard

P 1 *

Mono

−− : −− am

You can select the type of picture which best corresponds to your viewing requirements.

1Press the MENU button to display the menu.

2Press the ENTER button to select Picture.

3Press the ENTER button again to select Mode.

4Select the required mode by pressing the ▲ or ▼ button, then press the ENTER button.

Available modes: Dynamic, Standard, Movie

➢ Thesource.settings values may vary depending on the input

5Press the EXIT button to exit.

➢ Choose Dynamic for viewing the TV during the day or when there is bright light in the room.

Choose Standard for general TV watching mode.

Choose Movie when viewing the movie.

➢You can select these options simply by pressing the P.MODE button on the remote control.

Easy Setting

1Press the TOOLS button on the remote control.

2Press the ▲ or ▼ button to select Picture Mode.

3Press the ◄ or ► button to select the required option.