Configuring Picture Option |
|
|
| |||
1. | Press the MENU button to display the menu. | TV | Picture |
| ||
| Press the ENTER button, to select "Picture". | More |
|
| ||
2. | Picture Options | | ||||
Press the ▲ or ▼ button to select "Picture Options", then press | Reset | : OK | | |||
3. | the ENTER | button. |
|
|
| |
Select the required option by pressing the ▲ or ▼ button, then |
|
|
| |||
4. | press the ENTER | button. |
|
|
| |
When you are satisfied with your setting, press the ENTER | Move | Enter | Return | |||
| button. |
|
| |||
|
|
|
|
|
| |
5. | Press the EXIT button to exit. | TV | Picture Options |
| ||
➣ In PC mode, you can only make changes to the “Colour | Colour Tone | : Normal | | |
Size | : 16:9 | | ||
Tone” and “Size” from among the items in “Picture Options”. | Digital NR | : Auto | | |
| DNIe | : Off | | |
| HDMI Black Level : Normal | | ||
| 120Hz Motion Plus : Off | | ||
♦ Colour Tone: Cool2/Cool1/Normal/Warm1/Warm2 | Blue Only Mode | : Off | | |
|
|
| ||
You can select the most comfortable colour tone to your eyes. | Move | Enter | Return | |
➣ The adjusted values are stored according to the selected | ||||
|
|
| ||
"Picture" mode. |
|
|
| |
➣ When the picture mode is set to Dynamic or Standard, Warm1 and Warm2 cannot be selected.
♦ Size: 16:9/Wide Zoom/Zoom/4:3/Just Scan
You can select the picture size which best corresponds to your viewing requirements.
♦16:9: Adjusts the picture size to 16:9 appropriate for DVDs or wide broadcasting.
♦Wide Zoom: Magnify the size of the picture more than 4:3.
♦Zoom: Magnifies the 16:9 wide picture (in the vertical direction) to fit the screen size.
♦4:3: This is the default setting for a video movie or normal broadcasting.
♦Just Scan: Use the function to see the full image without any cutoff when HDMI (720p/1080i/ 1080p) or Component (1080i/1080p) signals are input.
➣In PC Mode, only "16:9" and "4:3" mode can be adjusted.
➣Settings can be adjusted and stored for each external device you have connected to an input of the TV.
➣Temporary image retention may occur when viewing a static image on the set for more than two hours.
➣"Wide Zoom": Move the screen up/down using the ▲ or ▼ button after selecting the 
by pressing the ► or ENTER
button.
➣"Zoom": Select 
by pressing the ◄ or ►button. Use the ▲ or ▼ button to move the picture up and down. After selecting 
, use the ▲ or ▼ button to magnify or reduce the picture size in the vertical direction.
➣When Double ( 
, 
) mode has been set in PIP, the Picture Size cannot be set.
➣After selecting “Just Scan” in HDMI (1080i/1080p) or Component (1080i/1080p) mode: Select 
by pressing the ◄ or ►button. Use the ▲, ▼, ◄ or ► button to move the picture.
Reset: Press the ◄ or ► button to select “Reset”, then press the ENTER
button. You can initialize the setting.
➣If you use the “Just Scan” function with HDMI 720p input, 1 line will be cut at the top, bottom, left and right as in the overscan function.
You can select these options by simply pressing the P.SIZE button on the remote control.
English - 18