OPERATING THE RECEIVER
1.2 Auto Scanning
The sub menu “Auto Scanning” will enable download of the channels automatically from the preprogrammed load.
To download channels automatically:
●Select the region which is possible in your location for Auto search.
●You can select All or Only Free option mode. All : Scanning all the channels
Only Free : Scanning free channels
●Select the FFT (Fast Fourier Transform) Mode. You can select the value of 2K or 8K.
●Setting the maximum or minimum frequency.
●Press the OK key.
Auto Scanning menu will be displayed.
All the channels in the list will be automatically downloaded.
1.3 Reset to Factory Defaults
This to restore the factory set values in case the user
has encountered some problems after changing any values of channel data and others which may be in error.
At the request window,
if you press the OK key, the receiver will be reset to factory default settings automatically.
Note : This cause your previous settings to be deleted!
T R I A L | R E C E I V E R |