Samsung MF68-00271A manual Connecting Your DTB-9401F, Location of the Receiver

Page 7

DTB-9401F

CONNECTING YOUR “DTB-9401F”

1. LOCATION OF THE RECEIVER

Your DTB-9401F should be placed under proper ventilation.

Don’t put in completely enclosed cabinet that will restrict the flow of air, resulting in overheating.

The location should be safeguarded from direct sunlight, excess moisture, rough handling or household pets.

Avoid stacking other electronic components on the top of the receiver.

The location should be safely accessible by the cable from your antenna system.

2. CONNECTING THE RECEIVER WITH AERIALS

You can connect the receiver to the following type of aerials:

Use a standard outdoor roof aerial intended for receiving channels between VHF and UHF.

Because many older roof-mounted aerials may only receive a limited number of channels, it is difficult or impossible to receive digital channels transmitted on higher frequencies. If so, you may replace the roof aerial.

Some outdoor aerials are directed towards an analogue transmitter. The aerial must be directed towards a digital TV transmitter.

It is not desirable to use indoor or window mounted aerials, as it will be difficult or impossible to receive digital channels.

3.CONNECTING THE RECEIVER TO TV

To connect the receiver with your television, you can use Scart Cable. In the case of connecting your TV through SCART cable,

connect the SCART connector marked TV to the respective SCART port on the TV.

4. CONNECTING YOUR VCR

To connect a VCR, the DTB-9401F has been provided with SCART at the rear marked “AV2(EXT)”.

Using a SCART connector, the VCR can be connected to the receiver.

GB-6

D I G I T A L

T E R R E S

Image 7
Contents Digital Terrestrial Receiver Instructions foruse Mains Supply Safety InstructionsFailure to follow one of them may cause electrical shock Content User Section General FeaturesLocation of the Receiver Connecting Your DTB-9401FGB-7 LED DescriptionThis is used to connect to your TV This is used to connect to your VCRThis is used to connect other receiver Remote Control Unit Red FAVEPG TEXTgreenDetailed program information Volume ControlBasic Functions Display ScreenSelect Soundtrack Service ListSelect Videotrack Service Frequency Service FavoritesService Alphabetical Service ProviderSubtitle Program InformationEPG-Electronic Program Guide Teletext OSD Audio ModeTeletext VBI Following on screen display will appear Operating the ReceiverManual Scanning Auto Scanning Reset to Factory DefaultsTo download channels automatically Delete Channel Delete FrequencyTo delete channels from Favorite Group Delete All ChannelsDelete Scrambled Channels Favorite ChannelsTo edit Channel Name Move & Edit ChannelSet Channel Lock To cancel the lockChange PIN Code This will take you to the following menu Change PIN CodeLanguage Selection OSD SettingTime & Timer Setting Media SettingsSystem Information Software UpgradeDisposal TroubleshootingTechnical Specifications BASE-BAND AUDIO/VIDEO Output Video Memo Memo Memo