Using the Help System for Automated Activities
After selecting an activity, if any of the devices or components don’t seem to be on or are set incorrectly, use the Help button. There may be several help screens to help you with your activity as shown here:
Once the help screens appear, look at your system. If anything is off, use the buttons on the first screen to power them on, then press NEXT (the PAGE button). The second and third screens enable you to correct an input. Additional screens may appear if your system is custom. Exit help by pressing the HELP button again.
Accessing the MX-810’s Setup Menus
The
buttons at the same time as shown here:
At the same time, press and hold both the ACTIVITIES button and the ENTER but- ton. When the SETUP screen appears, you can release the two buttons.
Page 7