Universal Remote Control MX-810 manual Setting the Button Beep Volume, System Info

Page 14

MX-810OWNERS MANUAL

Power Remaining and Battery Warning Settings

On this screen, you can see how much battery charge remains and you can reset the “Low Battery” warning to either 10, 20 or 30 percent. The battery indicator at the top left of the MX-810 screen will flash when your low battery warning level is reached.

Note the current remaining battery charge here.

Use the LESS and MORE buttons to set the battery warning.

Press the SAVE button to save your setting.

System Info

See how much memory you’ve used on this screen.

You cannot make any changes to the data displayed on this screen. It is informational only.

Press the OK button to exit.

Setting the Button Beep Volume

Use the buttons next to OFF and LOUDEST to adjust how loud the beeps are.

Use the OFF and LOUDEST buttons to set the Beep volume.

Press the SAVE button to save your setting.

Page 11

Page 13 Page 15
Image 14
Page 13 Page 15
Contents Operating Your System Page Table of Contents Congratulations User Configurable Screen and Button LightingIntegrated Sound Signaling Custom Labeled ButtonsOptional RF No Rules Operation Installing and Charging the Battery Programming the MX-810 Using the MX-810 to Manually Control a Device Using the MX-810 to Automate an Activity Using the Help System for Automated Activities Accessing the MX-810’s Setup MenusPage Setting the Screen Auto Turn Off Setting the Button LightingSetting the Screen Pick Up Sensor System Menu Setting Button Lighting Automatic OnSetting the Button Lighting Auto Turn Off System Info Setting the Button Beep VolumePower Remaining and Battery Warning Settings Setting Display for Time or Date Setting TimeSetting Date Date and Time MenusErasing and Resetting USA Limited Warranty StatementSpecifications Contact UsYour Devices Your Activities Complete
Top Page Image Contents