Sony MHC-W55 manual Recording From the Radio, Recording From Another Tape dubbing

➔continued

5 Press ENTER/NEXT.

The chosen track number lights up in the music calendar and is memorized. If the track number disappears before you press ENTER/NEXT, go back to step 4.

6 Repeat steps 4 and 5 to programme the remaining tracks you want to record on side A in the order you want them to be recorded.

7 Press P on the remote to pause recording at the end of side A.

“P” appears in the display. The total playing time “0.00” is displayed.

8 Repeat steps 4 and 5 to programme the remaining tracks you want to record on side B in the order you want them to be

To activate DOLBY NR

When you want to reduce the hiss noise in low-level high-frequency signals, press DOLBY NR so that “DOLBY NR B” appears in the display after step 10.

Recording From the Radio

You can record from the tuner onto a tape. Use TYPE I (normal) or TYPE II (CrO2) tape.

SYSTEM

POWER m ON

5 Press r REC.

Deck B stands by for recording.

6 Press P PAUSE to release recording pause.

Recording starts.

To stop recording

Press p on the tape player.

To reduce noise during AM recording

If a whistling noise is heard while recording, reorient the AM loop aerial for optimum reception.

To activate DOLBY NR

When you want to reduce the hiss noise in low-level high-frequency signals, press DOLBY NR so that “DOLBY NR B” appears in the display after step 4.

recorded.

9 Press § EJECT and insert a blank tape into deck B with the side you want to record on facing forward.

Recording starts from the front side of the tape, unless you change the playing direction before recording.

Make sure the tabs on the cassette have not been removed.

10 Select dual or single-sided recording.

To record	Press DIRECTION
	MODE to select
One side of the tape	A
Both sides*	ß or RELAY

*Recording always stops at the end of the reverse side. Be sure to start from the front side.

11 Press CD SYNCHRO.

Deck B stands by for recording.

12 Press P PAUSE to release recording pause.

Recording starts.

After about 10 seconds, the CD starts playing.

To stop recording

Press p on the tape player or the CD player.

To check the order

Press CHECK repeatedly.

Each time you press CHECK, the number of the programmed tracks appear in the display.

To cancel programme edit

Press PLAY MODE repeatedly until “PROGRAM” or “SHUFFLE” disappears from the display.

2

⁄	»	P
	p
Æ		»
»		Æ	p
p		p

r	P
⁄	⁄

5 6 1 4

DOLBY NR

1 Press § EJECT and insert a blank tape into deck B with the side you want to record on facing forward.

Recording starts from the front side of the tape, unless you change the playing direction before recording.

Make sure the tabs on the cassette have not been removed.

2 Press TUNER/BAND several times until the desired radio band appears.

3 Tune in the radio station you want to record. (See “Listening to the Radio”, or “Playing Preset Radio Stations” for details.)

4 Select dual or single-sided recording.

To record	Press DIRECTION
	MODE to select
One side of the tape	A
Both sides*	ß or RELAY

* Recording always stops at the end of the reverse side. Be sure to start from the front side.

Recording From Another Tape (dubbing)

Dubbing Another Tape Automatically

You can record the whole tape onto another automatically by using high speed dubbing. Use the buttons on the unit to do this operation and TYPE I (normal) or TYPE II (CrO2) tape for dubbing.

SYSTEM

POWER m ON

⁄	»	P
	p
Æ		»
»		Æ	p
p		p

r	P
⁄	⁄

1 3 4 1 2

1 Press § EJECT and insert a recorded tape in deck A with the side you want to play facing forward.

Also, insert a blank tape in deck B with the side you want to record on facing forward.

18

Chapter 4: the Tape Player