AV-EXpertManual.qxd 7/12/07 6:41 PM Page 9
Programming AVEX R6 using
Pre-Programmed Codes
There are three ways you can program your AVEX R6 using the component brand codes that are pre- programmed into the remote.
•Quick
•
•
The Quick
* * *
Quick Set-Up Method
STEP 1: Manually or using your old remote, turn on the component you want to
STEP 2: Point the AVEX R6 toward the component that you want to program (in this case the TV set) and press and hold the component button (in this case the TV button). While holding down the component button, begin to press numeric keys, one number at a time, starting from 1, continuing to 2, 3 ... 0 until component (in this case the TV) turns off.
STEP 3: Release the component button to save the code. The component LED light will blink three times to confirm that the code has been stored.
Repeat the above three steps for other components.
COMPONENT
BUTTONS
NUMBER
PAD
Page 9