Toshiba TV-GEN-03 specifications Appendix a

Page 13

TOSHIBA PJTV

Digital Convergence Alignment

Appendix A

Section 9: WIDTH, HEIGHT, & VERTICAL LINEARITY ADJUSTMENTS

Readme: See the notes in Section 5, before performing the following procedure.

1.Exit the convergence adjustment mode as described in Section 2.

2.Press the MENU button on the unit control panel to display the RCUT register.

3.Use the channel up/ down keys to select the WID register.

4.Use the volume keys to adjust the WID register until the vertical lines are close to those on the overlay.

5.Use the channel up/ down keys to select the HIT register.

6.Use the volume keys to adjust the HIT register until the horizontal lines are close to those on the overlay.

7.Use the channel up/ down keys to select the VLIN register.

8.Use the volume keys to adjust the VLIN register until the horizontal lines are close to those on the overlay.

8.If needed, repeat both the HIT and VLIN adjustments for the best results.

9.Push the 7 key to return to the convergence mode and continue with Section 5.

Module No. TV-GEN-03

Page 12 of 20

Page 12 Page 14
Image 13
Page 12 Page 14
Contents Objectives Model Year All Models All Prerequisites None PurposeFirst things first Overlays Consider thisRatio Part Screen Aspect Picture Model NumberYear Example 1 PSOL40X1Then… Accessing Service Mode Rubber meets the road Convergence Alignment Toshiba Pjtv Screen Zone Size End of the line? SpecificationsDon’t Worry Enter to Load Backup Data Exit to Exit Points to remember Something to think aboutAppendix a Interlaced Scan Units with 43 Aspect Ratio Appendix a Appendix a Appendix a Toshiba Pjtv Appendix B Appendix B Appendix B Toshiba Pjtv Appendix C Appendix C Appendix C
Top Page Image Contents