Toshiba TV-GEN-03 Part Screen Aspect Picture Model Number, Ratio, Year, Example 1 PSOL40X1

TOSHIBA PJTV

Digital Convergence Alignment

When using an overlay kit, it is important to know the type of unit it is designed for use with and the kit part number. The availability and part numbers of the overlay kits are subject to change as screen sizes are added or discontinued. Table 1 details the currently available overlay kit part numbers.

Part	Screen	Aspect	Picture	Model
Number	Size	Ratio	Size	Year
PSOL40X1	40”	16:9	All	All
PSOL42W1	42”	16:9	Full	2002+
PSOL43X1	43”	4:3	All	All
PSOL4801	48”	4:3	N/A	All
PSOL50X1	50”	4:3	All	All
PSOL50W1	50”	16:9	Full	2002+
PSOL53X1	53”	4:3	All	2002+
PSOL55X1	55”	4:3	All	All
PSOL56X1	56”	16:9	All	All
PSOL57W1	57”	16:9	Full	2002+
PSOL61X1	61”	4:3	All	All
PSOL65X1	65”	16:9	All	All
PSOL7101	71”	4:3	N/A	All

Table 1

Each kit part number begins with the acronym PSOL, meaning Protective Screen Over Lay. Following the acronym are a series of alpha-numeric characters identifying the screen size and intended unit type. In Example 1, “40” identifies the kit for use with a 40 inch screen size. “X1” indicates the kit contains all grids for any unit in that screen size.

Example 1: PSOL40X1

In some cases there are models with different aspect ratios within a screen size category. In such cases, the letter “W” in the kit part number indicates use with wide screen (16:9 aspect ratio) units. See Example 2 for details:

Example 2

PSOL50X1 is used with any 50 inch unit with a 4:3 aspect ratio screen. PSOL50W1 is used with any 50 inch unit with a 16:9 aspect ratio screen.

Readme: The overlay dimensions are contained in the appropriate unit Service Manual, as shown in Figure 1. If a particular overlay kit is not available, or there is an urgent need for a complete convergence alignment before the kit can be delivered, strings and low-tack tape can be used to achieve the desired results.

Module No. TV-GEN-03

Page 2 of 20