Using the Remote Control
Buttons
Component Buttons
Press one of the buttons to set the remote to operate that component.
|
|
| R1 | SAT |
|
| |
|
| ER | VC |
| •CABL | E | T |
| W |
|
|
|
| ||
O |
|
|
|
|
| V | |
P |
|
|
|
|
|
|
|
|
|
| R2•LD | AUX |
|
| |
|
|
| VC |
|
|
| |
REW PLAY FF
REC STOP PAUSE
DISPLAY | HA | N | SEARCH |
C | |||
VOL |
|
| VOL |
MUTE | C |
| PREV CH |
AUX (Auxiliary)
Used with POWER button to turn on compatible RCA audio component. (See page 17.)
SAT•CABLE
Turns on a compatible RCA cable box or digital satellite system receiver. (See page 16.)
Used with POWER button to turn on another brand of cable box, other than RCA, when the remote is programmed to control that cable box. (See page 16.)
TV
Turns on a compatible GE, RCA, or ProScan TV and sets the remote to control the TV. Used with POWER
button to turn on another brand of TV, other than GE, when the remote is programmed to control that TV. (See page 15.)
VCR1
Turns on a compatible GE, RCA, or ProScan VCR and sets remote to control the VCR.
VCR2•LD
Turns on a compatible GE, RCA, or ProScan VCR and sets remote to control VCR when it has been setup. (See page 14.)
Used with POWER button to turn on compatible RCA or ProScan LaserDisc player.
HAN |
1 2 3
4 5 6
VCR Function Buttons
Press VCR1 (VCR2•LD) to set remote to control the VCR to use the function buttons.
7 8 9
INPUT | 0 | TV•VCR |
CLEAR | * | SPEED |
| MENU |
|
| PROG |
|
| H | EDIT |
G | S UT | |
T |
| |
O |
| |
E |
| |
| L |
|
J |
|
|
| – SLOW + | 3TRACKING4 |
Arrow Buttons ( 
)
Used for frame advance and variable speed picture search when JOG SHUTTLE is turned on.
CHAN Up or Down
Selects next higher or lower channel in the VCRÕs channel memory.
CLEAR
Resets time counter to 0:00:00. Allows you to change entries when setting the clock or VCR for a timer recording.
DISPLAY
Shows VCR operating displays on the TV screen.
Displays the time counter.
EDIT
Signals two properly connected compatible VCRs to begin copying a tape. (See page 32.)
FF(Fast Forward)
Fast forwards the tape when the VCR is stopped.
Searches the picture in forward motion during playback.
INPUT
Turns the line input on or off.
L1 or L2 appears in VCRÕs display panel and VIDEO1 or VIDEO2 appears on TV screen.
Line input refers to the signal coming from the component connected to the audio/video input jacks on the back (L1) or front (L2) of the VCR.
JOG SHUTTLE and Indicator Light Used with arrow buttons for frame advance and variable speed search. (See page 21.)
The indicator in the middle of the arrow buttons lights when JOG SHUTTLE is turned on.
MENU•PROG
Displays the VCR MAIN MENU on the TV screen.
Removes a menu from the screen.
Numbers (0 through 9)
Select a channel up to 99 by pressing two numbers.
Select a cable channel over 99 by pressing and holding 1 until 1Ð Ð appears on the screen. Then press the other two numbers.
12