GE VGN550 Controlling an Auxiliary RCA Component, Program the Remote for an Auxiliary Component

Page 19

Using the Remote Control

Controlling an Auxiliary RCA Component

The remote that came packed with your VCR is also capable of controlling one compatible RCA audio component, such as an AM/FM radio, CD player, tape player, or phonograph. The remote must be programmed for the specific component it is to control. To program the remote, use the code that corresponds to your component.

Program the Remote for an Auxiliary Component

1. Turn on the component.

2. Point the VCRÕs remote at the component.

3. Hold the AUX button and press two number buttons to enter the code for your component.

4. Release the buttons.

5.Press POWER on the remote. If the component turns off, setup is complete.

Type of Auxiliary Audio Equipment and Code*

RCA

AM/FM

03

CD

07

Tape

06

Phono

05

*The remote may not be able to control every RCA model of audio equipment listed.

Operate the Auxiliary Component

After you have set up your remote to control your component, test the buttons to see which ones operate the component.

1. Point the remote at the component and press AUX.

2. If the component does not turn on in step 1, press AUX and then POWER.

3.Test the buttons on the remote to see which ones operate your component.

17

Image 19

Contents VCR User’s Guide Important Information Refer Servicing to Qualified Service PersonnelTable of Contents Choose one answer from below Optional Hookups How to hook up two VCRs for copying tapes?Choosing a Hookup What type of Cable-TV system* do you have?Basic hookup Antenna or Cable System Without a Cable BoxAdvanced hookup Cable System With Cable Box to Unscramble All Channels Plug in power cords of VCR, TV, and cable boxBack of VCR Cable Box Cable System With Cable Box to Unscramble Only Pay Channels Option B hookup Connecting Two VCRs for Copying TapesPlug in power cords of VCRs and TV Option a hookupInsert batteries in remote Check accessories with VCRAttach power cord to back of VCR StartupTurn on the VCR Turn on the TVSelect the VCR’s output channel Place channels in the VCR’s memory Select the language/Escoge una lenguaUse Tvvcr button Add or remove channels from the VCR’s memorySkip this step if you used one of the advanced hookups Set the time and date Component Buttons ButtonsVCR Function Buttons TV Function Buttons Controlling a VCR Program the VCR for Remote ControlProgram the Remote for a TV Controlling a TVOperate the TV Operate the Cable Box or Digital Satellite System Receiver Program the RemoteProgram the Remote for an Auxiliary Component Controlling an Auxiliary RCA ComponentOperate the Auxiliary Component Operating Instructions Video Playback ModePlay a Tape Tape Playback HI-FI/LINEAR/MIX Feature Using the Playback FeaturesAuto Head Cleaner Manual Tracking Pause for Stop ActionSlow Motion Digital Auto TrackingFast Forward Search Picture SearchTime Counter Display ButtonIndex Search Index SearchCommercial Scan Zero SearchRecording Pause Using the Recording FeaturesTypes of Recordings Recording SpeedsTo Make a Recording Basic Recording Operating InstructionsSetting a Timer Recording Recording While You’re Away Timer RecordingTimer Recording From the VCR’s Line Input Check or Clear a Timer RecordingSelect Cable Box or Satellite Receiver Channel Operating Instructions One Touch RecordingDisplay on TV Screen To Record Stereo Broadcast TV or SAP Recording Broadcast Stereo TV or SAP Second Audio ProgramTo Record Audio Only Recording Audio OnlyUsing Dual Remote with AutoEditTM Using Two VCRs for Copying and Editing TapesFront Panel Location of ControlsDisplay Panel Back PanelStatus Indicators Cassette-In IndicatorHifi Indicator SAP IndicatorTrouble Heres what to try Trouble ChecksWill not record or play Timer recording not madeVCR makes noise when stopped Time counter not workingCleaning the VCR SpecificationsAdd or Remove Channels from Memory IndexMenuprog Button 10,11,12,14,18,19,27-28,30,31,34 IndexVCR Main Menu